CNC Machine Tool Touch Probe/Optical Probe/ Machine Center Probe/OPS-30/Similar Renishaw Probe

Basic Info.Model NO.OPS-30After-sales Service1 Year Warranty, Lifetime MaintenanceWarranty1 YearLogo Printingwith Logo PrintingSize Small Customized Customized TypePrecision translational headMaterial Stainless Steel Average Lead Time3-4daysTrademarkPioneerTransport PackageCartonOriginChinaHS Code8466939000Product DescriptionComposition of Probe System:OPS-30 series optical probe system includes two pieces of hardware and one software package; The software package model is SP-W10, the two pieces of the hardware are:1)OP510 optical probe (including optional shank and stylus );2)OSI-20 optical receiver(the standard cable length 8m/the optional lengthened cable).Technical Parameters:1)The technical parameters of OP510 optical probe: Stylus sensing direction: ±X, ±Y, +Z; Stylus sensing over-travel: X-Y±15°, Z +5 mm;The adjusting range of trigger force in Z direction: 500-1000 g;Trigger force in X-Y surface: 50g -100g;Unidirectional repeatability(2σ): ≤ 2 μm;The optical signal receiving/sending distance: ≥ 5;Working days of new batteries ( 5% utilization rate in a single shift):140 days;Seal grade: IP68.2)OSI-20 optical receiver technical parameters:The optical signal receiving/sending distance: ≥ 5 m;For the probe switch on/off with M code, The optical signal transmission range can be adjusted to four grade: 5-6 m, 3.75-4m, 2.5-3m, 1.25-1.5m;Input voltage is 24±10% V DC and the output load current is 50 mA.Technical Characteristics:The probe switch on/off method:: Range on/off, M code on/off;Infrared coded signals are used to transmit information between the probe and the receiver;The transmitting distance of the probe signal can be adjusted by a trigger probe with a special program to set the receiver;Output four kinds of SSR signals to the machine control system when the probe is in the states of trigger, error, probe batteries low and output pulse;The OSI-20 receiver can change its logical state of the output signal by setting;The double infrared signal receiving and transmitting devices are used to increase the reliability of the equipment;The LED lights in the receiver show the working status of the probe system.Basic configuration:1)OP510 ProbeStandard stylus model: M4-P50-RB6-S36;Battery specification: 14250, 3.6V,1000mAh; 2 ps.;Usually, the probe shank is 7:24 taper shank with the BT or ISO standards, the common models are 30#,40#,50# and etc.; the shank with the HSK or other standards can also be used.2)OSI-20 ReceiverThe cable length usually is 8 meters with13 cores' shielded cable;A fixed bracket with a universal adjustment function is equipped.