Shell and Tube Heat Exchanger for Petrochemical Industry

Product Description 1,The main components of shell-and-tube heat exchanger include shell, tube bundle and tube plate. The shell is usually cylindrical, with a number of tubes installed inside, and the tubes are fixed by parallel tubes through the tube plate.2,Shell and tube heat exchangers transfer heat through the fluid in the shell path in the shell and the tube path in the inner tube bundle. Heat can be transferred between shell and tube by conduction and convection.3,The design of shell-and-tube heat exchanger makes the heat transfer area large, and at the same time realizes the efficient heat transfer through the flow of fluid.4,To adapt to large flow and high pressure conditions. By increasing the number of tube bundle, adjusting the diameter and length of pipe and other parameters, the requirements of different process conditions can be met.5,Shell and tube heat exchangers can handle high temperature, high pressure and corrosive media.6,Shell-and-tube heat exchangers are relatively easy to maintain and clean. By removing the tube plate, the internal tube bundle can be easily inspected, cleaned or repaired. Product ParametersSerial numberCorrelation parameterMinMax1Design pressureFV10MPa2Test pressureFV13MPa3Design temperature-40ºC500ºC4Flow range1m³/h3000m³/h5Heat transfer area1sq.m3000sq.m6Heat exchange capacity50KW300MWHeat exchanger inquiry parameterProduct nameHot side mediumHot side inlet temperatureTemperature of the hot side outletCold side mediumCold side inlet temperatureCold side outlet temperatureHeat exchange capacityHeat transfer areaDesign criteriaOther requirementsShell and Tube Heat Exchanger          Detailed Photos Company ProfileOur AdvantagesFAQ