Whole Family LED Floodlight 30W 50W 80W 100W 120W 150W 200W 240W Lighting LED Sports Flood Light

Product Description LED CH Flood Light Features-30w/50w/100w/150w/200w/240w/300w option-High thermal conductivity ADC 12 Aluminum -0 degree angle installation with low glare -ADC 12 Material for good heat dissipation -Diversal light distribution angles 15/30/60/90/polarized design , can be applied in a wide range -DALI/1-10V/0-10V dimming, microwave induction function optional -Glass +PC lens design , with high luminous efficiency  GENERAL INFORMATIONELECTRIC INFORMATIONMounting ModuleBracket systemElectrical ClassClass IOperating Temperature-30ºC/+45ºCNorminal Voltage100-240VAC/100-277VAC/180-528VAC 50Hz/60HzStorage Temperature-30ºC/+80ºCLED CurrentSMD3030 150mA@6V  Lens Options7°/15°30°/60°/90°/120°/P30*90°LED Lamp Power30W(3900Lm)50W  (6500Lm)100W (13000Lm)150W (19500Lm)200W (26000Lm)240W (31200Lm)300W (39000Lm)Main ReferenceCompany StandardsEN 60598-1; EN60598-2-1; EN62493; EN55015;EN 61000-3-2; EN61000-3-3; EN61547; EN62471IEC 60598-1:2003;IEC 60598-1:2008;IEC 60598-2-1:1987;IEC 60598-2-3:2002;IEC 60838-1:2004;IEC 60838-2-2:2006;IEC/PR 61341:2010;IEC 61347-1:2007;IEC 61347-2-13:2006;IEC 62031-2008;GB 7000.1; GB 7000.201; GB17743; GB17625.1Power Factor≥0.92Flickering Percentage≤8%;≤3% (optional)THD≤20%Driver  BrandMeanwell/Moso/Sosen/INVENTRONICSSurge protection options (kV)L-N 4KV,L/N-PE 6KV@MeanwellL-N 6KV,L/N-PE 10KV@Moso/Sosen/INVENTRONICS10kV (optional) with LED signal and thermo fuse to disconnect load at the end of life20kV (optional) with LED signal and thermo fuse to disconnect load at the end of lifeControl systemDALI/1-10v/0-10v/DMX512 dimming, optional microwave induction function Mains connectionFor cable max section 2.5mm2Outgoing cable H05RN-F 2/3/5 × 1.5mm2Length on request (optional)HOUSING AND MATERIALSOPTICAL INFORMATIONHousingADC 12 die-casting aluminum Led color temperature4000K , 5000K ,5700K,OpticPC+GlassCRICRI≥70;CRI≥80(optional);CRI≥90(optional);TLCI is an option available upon requestHousing Finish Powder spraying surface treatment, corrosion resistance/electrophoresisLED BrandCREE;NichiaRefractorPC  UV0Upward light output ratio0%Standard ColourRAL9017  Black;RAL9007 Gray(optional)Photobiological safety classIEC 62471, EN 62778 EXEMPT GROUPIPIP65Testing standardLM 79-19, EN 13032-1 (all measurements in ISO17025 accredited laboratory)Impact Housing ResistanceIK08 (5 J)  IK09 (optional) (10 J),IK10 (optional) (20 J)Lifetime of the LED'sTq =45°,>50000h - L70B50Impact Lens ResistanceIK08 (5 J)Vibration TestCompliant with modified IEC 68-2-6 (0.5G), ANSI C136.31 (3G)Detailed Photos Product details:FAQFAQQ1. Are you a manufacturer?SENSE : Yes, we have our own factory with over 20 years of R&D and manufacturing experience based on ISO quality management since 2003.Q2: What Certification do you have?SENSE : TUV/CB/CE/EMC/SAA/CCC/RoHS approved. And with IP65/IP66/IP67/IK08/IK09/IK10/EMF/LM79/LM80/TM21/WF2/IES report.Q3. Can I have our LOGO on the products and packages?SENSE : Yes. We provide OEM service to our customersQ4: Warranty of your products?SENSE : 5-7 Years warranty depends on customer's requestsQ5: What about the lead time?SENSE : 3-7 days for sample, 10-20 days for mass production based on order quantities..Q6: Can you provide OEM/ODM?SENSE : Yes, OEM/ODM support for the different application requirements.Q7: How to deal with the faulty?SENSE : 1, Our products are produced in a strict quality control system and the defective rate will be less than 0.1%. 2, For defective products in the warranty period, we will send new lights with new orders for small quantities. 3, For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the actual situation.