Intelligent Car Battery Charger with Engine Starter, 12V 20A, for Lead-Acid Batteries

1.LCD screen2.Battery Recondition3.Charge rate4.Engine start button5.Battery charge button6.Positive (red) clamp7.Negative (black) clampThe TE4-0246 battery charger is for use on a normal 120V-230V circuit, and has a grounding plug that lookslike the plug illustrated in the sketch A in the illustration below. A temporary adaptor, which tools like the adapterillustrated in sketches B and C, may be used to connect this plug to a two-pole receptacle as shown in sketch B if aproperly grounded outlet is not available. The temporary adapter should be used only until a properly groundedoutlet can be installed by a qualified electrician.20A BATTERY CHARGER WITH 50A ENGINE STARTFor all 12V lead-acid batteries(WET, MF, AGM and GEL)Fully automatic multi-stage charger with emergency engine start functionReconditioning sulfated batteries that have been sitting for long periods of timeEasy readout for the charging status on the LCD screenDual USB for charging mobile devicesFully protection for reverse polarity, short circuit, overcharge, over-temp, etc.  Dimension ModelTE4-0246Battery Type12V STD, GEL, AGMRated AC Input VoltageAC105-125V, 60Hz or AC220-240V, 50HzMax Output Voltage14.4V±0.3Charging Current2A, 5A, 10A, 20A(MAX)USB Output (Optional)DC5V, 2.4A+1.0AEngine Start50AmpActivated Voltage4.2VDesulfation functionYesProtectionOverheatShort CircuitReverse PolarityOverchargeHousing MaterialABS ColorCustomizedCertificatecETL /CE-EMC/CE-LVD/ROHSWeight2.85kgSize30.5x19.5x11(cm)Socket StandardEU/AU/UK/USABOUT USTonny Electric & Tools Co., LtdOEMFunctional/Structural Design,  Packaging customization, Accept small quantity orderCERTIFICATESWe have many certificates, such as cETL, PSE, GS, TUV, CE, RoHs, PAHs, REACH. And we have 200+ patents and 600+ different kinds of high quality products