4800 Tex Fiberglass Pultrusion Roving for FRP Rebar and Profile

Product DescriptionDirect Roving for Pultrusion is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins, and is widely used in building & construction, telecommunication and insulator industry.Product FeatureGood process performance and low fuzzCompatibillty with multiple of resin systemsGood mechanical propertiesComplete and fast wet-outExcellent acid corrosion resistanceProduct Parameters ItemLinear DensityResin CompatibilityFeaturesEnd UseBHP-01D300,600,1200VECompatible with matrix resin; High tensile strength of the end composite productUsed to manufacture optic cableBHP-02D300-9600UP,VE,EPCompatible with matrix resin; Fast wet out; Eexcellent mechanical properties of the composite productUsed to manufacture various sectional barsBHP-03D1200-9600UP,VE,EPCompatible with resins; Excellent mechanical properties of the composite productUsed to manufacture various sectional barsBHP-04D1200,2400EP,PolyesterSoft yarn; Low fuzz; Compatible with resinsSuitable in manufacture of molded gratingBHP-05D2400-9600UP,VE,EPExcellent tensile, flexural and shear properties for composites productsHigh performance pultruded profilesBHP-06D2400,4800,9600EPHigh fiber strength, Good integrity and ribbonization,Compatibility with epoxy resin, Complete and fast wet-out in resins, Good mechanical properties, Excellent electrical properties of the finishedinsulation rods and insulation stanchionsIdentificationType of GlassEDirect RovingRFilament Diameter, μm13161717222431Linear Density, tex3002004006007351100 12002200240048009600ApplicationDifferent E-glass direct roving applies in different production processes and are compatible with various resins, including polyester, vinyl ester, epoxy and polyurethane. It covers Pultrusion,Filament Winding,Weaving,LFT and CFRT.Packaging & ShippingStorageUnless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15 ºC~35 ºC and 35%~65% respectively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet. The product should be transferred to the workshop 24 hours before use to undergo conditioning.   PackagingThe product can be packed on pallet or in small cardboard boxes. Package height mm(in)260(10)260(10)Package inside diameter mm(in)160(6.3)160(6.3)Package outside diameter mm(in)270(10.6)310(12.2)Package weight kg (lb)15.6(34.4)22(48.5)  Number of layers3434Number of doffs per layer1612Number of doffs per pallet48643648Net weight per pallet kg (lb)750(1653.4)1000(2204.6)792(1764)1056(2328)  Pallet length mm (in)1120(44)1270(50)Pallet width mm (in)1120(44)960(37.8)Pallet height mm (in)940(37)1180(45)940(37)1180(46.5) Company Profile       /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1