AAA-Rydmet-Solid Cemented Tungsten Carbide Rods-Bars

  The Introduction of the Carbide  Rods      The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.  Be of very high quality and tool peroformances, the grade for Cutting tools are usually in Sub-micron Grain and Ultra-fine Grain. As demand,the other grade can be custom-made.     They are ideal materials for the Solid rotoary Cutting tools, like Solid Carbide Endmill, Drills, Remaers, Taps.etc.      Usually, the carbide rods are in sintered conditions, but we can arrange the grinding process as per the clients specific demand. Our grinding are done by the Imported Centerless grinding Machines, we can meet the precision demand of our cleints from both Europe and American, usually, we control them in h6 finsihing, as demand, we can control it be h5, h4, h7.      We can even grind the Cemented  carbide rods even in 0.3 mm diameter if you have.   The Grades for the Carbide Rods:The Grade of the Tungsten Carbide RodsProperties of GradeRD10FRD10UFRD12UFRD06UFCo%1010126WC incl. Doping%90908894Densityg/cm314.4514.4514.114.9Vickers Hardness HV30kg/mm21580179016901890Rockwell Hardness HRAISO373891.892.5>92.593.5TRSN/mm23800400040003900PorosityA< 02< 02< 02< 02B0000C0000WC Grain Sizeμm0.80.50.4-0.50.5** We have the Co 15%, medium Grain Carbide for Mold Materials, like Punches, cores..The Sizes  for the Carbide Rods:Solid Carbide Rods (Full length) Nominal DiaD(mm)D(mm)LengthRemarks D (mm)Un-groundh6mm  0.50.70.5310-330  0.810.8310-330  11.21310-330  1.51.71.5310-330 1/16"1.58751.81.587512" -13"inchin size 22.22310-330  2.352.552.35310-330 3/32"2.382.62.3812" -13"inchin size 2.52.72.5310-330  33.23310-330 1/8"3.1753.43.17512" -13"inchin size 3.53.73.5310-330 5/323.9684.23.96812" -13"inchin size 44.24310-330  4.5 4.5310-330 3/16"4.76255.04.76212" -13"inchin size 55.25310-330  5.55.75.5310-330  66.26310-330 1/4"6.356.66.3512" -13"inchin size 6.56.76.5310-330  77.27310-330  7.57.77.5310-330 5/16"7.9378.27.93712" -13"inchin size 88.28310-330  8.58.78.5310-330  99.29310-330  9.59.79.5310-330 3/8"9.5259.79.52512" -13"inchin size 1010.210310-330  10.510.710.5310-330  1111.211310-330 7/16"11.1111.311.1112" -13"inchin size 11.511.711.5310-330  1212.212310-330  12.512.712.5310-330 1/2"12.712.912.712" -13"inchin size 1313.213310-330  13.513.713.5310-330  1414.214310-330 9/16"14.28814.514.28812" -13"inchin size 14.514.714.5310-330  1515.215310-330  15.515.715.5310-330 5/8"15.87516.115.87512" -13"inchin size 1616.216310-330  16.516.716.5310-330  1717.217310-330  17.517.717.5310-330  1818.218310-330  18.518.718.5310-330  1919.219310-330 3/4"19.0519.319.0512" -13"inchin size 19.519.719.5310-330  2020.220310-330  20.520.720.5310-330  2121.221310-330  21.521.721.5310-330  2222.222310-330  22.522.722.5310-330  2323.223310-330  23.523.723.5310-330  2424.224310-330  24.524.724.5310-330  2525.225310-330 1"25.425.725.412" -13"inchin size 2626.326310-330  2727.227310-330  2828.228310-331  2929.229310-333  3030.230310-334  3131.231310-335 1-1/4"31.7532.031.7512" -13"inchin size 3232.232310-336  3333.233310-337  3434.234310-338  3535.235310-339  3636.236310-340  3737.237310-341  3838.238310-342 1-1/2"38.138.438.112" -13"inchin size 3939.239310-343  4040.240310-344  4242.242310-344 **Carbide Rods with Special Diameter and length can be made as request TOLERANCES For Diameter and Length (h6) TOLERANCES for Roundness and Straightness (h6 ) Size, mmD, h6LSize, mmStraightness(Run-out)Roundness≤3+0,-0.006+5/+1≤40.15 max0.004 max5 to 6+0, -.0085 to 100.08 max8 to 10+0, -.00910 to 130.06 max12 to 18+0, -.011>130.05 max20 to 24+0, -.013  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1