ABS-YW11 lntegrated two-in-one smoke detector and heat detector
testerProduct function overviewlntegrated two-in-one smoke detector
and heatdetector tester is a fire detector integrating smoke
detector and heat detector. It can carry out a simulated test on
the smoke detector and heat detector. It applies to the fire safety
inspection, fire safety detection, fire safety maintenance, and
fire safety engineering and so on.By the principle of detection
based on electronic induction, when the top sensor of tester
approaches the surrounding ceiling of the detector within 100mm,
smoke or heat can be generated to achieve the purpose of the
test.Electronic atomizing and fuming technology is specially
adopted for fuming. The speciallydesigned environmental-friendly
liquid for vaporization is free from soot and tobacco tar and will
not cause secondary pollution on the detector.Electronic energy
conversion technology is adopted to rapidly raise the temperature
to the alarm threshold of temperature detector within a short
time.Weight3.1kgStandard Length2.7m ( Number of connecting rods can
be increased )Carton size(mm)630×215×100External materialAluminium
alloy or PEConnecting rod length580mmMaterial of connecting
rodAnodized aeronautical aluminum 1. Standard
versionWeight3.5kgStandard Length2.7m ( Number of connecting rods
can be increased )Carton size(mm)635×230×120External
materialAluminum alloy or PEConnecting rod length580mmMaterial of
connecting rodAnodized aeronautical aluminum 2.
Telescopic versionWeight3.5kgStandard Length3.5m ( Number of
connecting rods can be increased )Carton
size(mm)635×230×120External materialAluminum alloy or PETelescopic
rod length0.6~3.15mMaterial of connecting rodCarbon rod and
aluminum alloy anti burst ring 3. Luxury
versionWeight5.5kgStandard Length4.8m ( Number of connecting rods
can be increased )Carton size(mm)645×205×120External
materialAluminum alloy Connecting rod length580mmMaterial of
connecting rodAnodized aeronautical aluminumTelescopic rod
length0.6~3.15mTelescopic rod materialCarbon rod and aluminum alloy
anti burst ringInstructionsCharging: lug the dedicated power
charger to the power port. After the device is fully charged, the
charger indicator lights will change from red to green.Absorb
liquid for vaporization: Absorb a proper amount of liquid with the
injector. Disassembly of sealing screw: rotate and remove screw
counterclockwise and seal it clockwise. See Drawing 1.lnjection of
liquid for vaporization: Insert the needle of the injector into the
opening and press 5~8 ml. See Drawing 2.
Drawing 1
Drawing 2 5. Observation port of liquid
level: Observe the height of liquid with in the liquid level
chamber. See
Drawing 3 6. Connection: Select the number of
connecting rods according to the height and rotate to connect the
tester and connecting rods clockwise or
dissemble counterclockwise.
7. Intelligent infrared detection: When the top sensor of
the tester is close to the ceiling around the detector within
100mm, the instrument will work automatically and generate smoke or
heat to achieve the test purpose. When the top of the instrument is
more than 100 mm away from the ceiling, the instrument will
automatically stop working. See Drawing 4
Drawing 3
Drawing 38. Function switch: See
Drawing 5When testing the heat detector, press the button. When the
heater and fan are in standby state, the temperature reaches the
threshold in 3~5 seconds when the power is on. The distance from
the nozzle is 20 mm, and the measured temperature is about
190ºC.When testing the Smoke detector, pop up button. The fan and
fuming fluid are in standby mode.9. Lithium battery: Two 18650
Lithium batteries (0.22Ah/pcs). Fully charged battery can detect
450 ~ 800pcs detectors.10. One bottle of 50mL smoke agent
(Atomized fuming fluid ) can test about 5000 pcs of smoke
detectors.
Drawing 5/* March 10, 2023 17:59:20 */!function(){function
s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about Smoke Detector and Heat Detector Test Instruments
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup