Hot Selling Rotary Vacuum Drum Filter Press

Hot Selling ROTARY VACUUM DRUM FILTER PRESS  Application: As a intermittent pressure filtration equipment, it's used to separate the solid and liquid of suspension. Since the excellent effect of separation and convenient to use, it's widely used in petroleum, chemical, dyestuff, metallurgy, pharmacy, food, paper making, coal washing and sewage disposal and various industry which separation is needed. Structure Features PP filter press consists of high pressure plate, and filter chamber made of ordered filter plates. The slurry materials are sent to filter chamber by the pressure of feeding pump and then go into filtrating media (filter cloth) to separate solid and liquid in slurry material. When solid in slurry material becomes cake shape, The filter plates are molded by reinforced and thicken polypropylene, and they can bear on 1.0-2.0MPa filtration pressure. Detailed Product Description Auto press and open by hydraulic Auto feeding Auto plate shifting Auto bomb door and drip tray open and close Automatic program-controlled chamber filter press has such features as follows Technical Parameter   ModelXMZY50/800-30UB High pressure automatic hydraulic filter pressFilter area(M2)50 The thickness of the filter cake(mm)30 filter chamber volume(L)621 Filter plate number(pcs)50Reinforced ppThe filter room number(pcs)50 The filter material and characteristicsPlates Material: Reinforced and high pressure pp  Features: Acid, alkali, salt erosion, non-toxic, odorless, light weight, high strength, and effortless operation. Salt solution and polar solvents, good toughness, chemical stability, Plates using cone-shaped point Boss design, molding, with filtering speed, low dehydration cake, washed thoroughly uniform, fine processing of the sealing surface sealing performance intact.Filter plate size(mm)800x800x65  Filter plate materialReinforced pp with 1.0-2.5MPa filtration pressureResistance to acid and alkaliFilter cloth materialResistance to acid and base Number of filter cloth(pcs)50+1Including sealing sheetSupport beamsQ235 steel welding parts (thicker rectangular tube) Keep plateQ235 solid steel plate welded pieces The thrust plateQ235 solid steel plate welded pieces Pressure headQ235 solid steel plate welded pieces Oil cylinder20 steel welding Hydraulic stationQ235B steel welded Filter control cabinetCarbon paint Electrical control cabinetIntelligent control panel Relay control Filtration temperature90≤ Filter pressure(Mpa)1.0-2.5 Feeding wayThe thrust plate feeding in the middle Discharging belt conveyorDS800x5500MM Feeding pump Ceramic high-pressure piston pumpPower: 11kw motor.Flow pressure: 1.0-2.5MPa. Drainage wayOpen flowAccording to customer's requirementHydraulic station valve groupHydraulic valve group The oil pump of the hydraulic pressure stationPlunger pump Oil pump seatcasting Power station(kw)4 Oil cylinder pressure(Mpa)20 Oil cylinder maximum effective schedule(mm)580 The cylinder diameter(mm)D220 Compact formHydraulic automatic packing, manual unloadingThe filter cake was dropped by its own weightThe whole machine size(mm)5530×1100×2265 Weight(Kg)5850 The paint coating standardAll steel pretreated to remove the oxide layer rolling, rust and foreign matter, the inner surface coated with epoxy paint, do strength corrosion, the outer surface again primer, epoxy anti-corrosion coating twice.Manufacturing standardsJB/T4333.2-2005NamedThe performance parameters rack1. Function:carrying the filter plate, providing top tight pressure, under a certain pressure to ensure the seal and achieve filtration purposes2, consists of: Pressing plate, thrust plate machine feet, and the feet of the cylinder block, cylinder system, the main beam (thick rectangular tube)3. Rack material: Welded steel, 304 stainless steel rails Filter plate1, function: Install the filter media to ensure normal filtration under pressure, can be fully realized backwash2. Filter plate material: Reinforced Polypropylene3. Handle material: Reinforced polypropylene and wear-resistant plastic The hydraulic system1, function: to provide clamping force, clamping cylinder return and ensure the normal operation of the robot2, consists of: tank, pump systems, manifold, hydraulic valves, tubing, pressure display and transmission systems3. Maximum hydraulic pressure: 30MPa; rated pressure: 20MPa. PSManufacturing Standards: JB / T4333-2005 "Van filter and frame filter technology"Quality assurance: product safety in line with European CE certification and the German DIN standard.Quality assurance system in line with ISO9001: 2008 standardEnvironmental System certified to meet: ISO14001: 2004 standard/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1