Electric Power Accessories Sand Casting for Strain Clamp

STRAIN CLAMPS CLEVIS PISTOL (GUN) ACSR 50MM2 COMPLETE WITH 3  U-BOLTSCast steel hot dip galvanisedThe minimum failing load shall be indelibly marked  on each Pistol  clamp.TYPE:NLD-3 NAME:Parallel groove clamp APG-B4 Specification   Al 25-240mm²      Size 62*58mm   Double-bolts  Bolt M10*60  Weight 280g 3.6The throat of the staple will present adiameter range mm26.423.7Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver, º30º3.8Suspension clips present a breaking load kg11,3403.9Minimum weight of zinc deposited in the hot galvanized steel g/m²9153.10Minimum weight of zinc deposited in bolts, nuts and washers g/m²4003.11Dimensions and drawingsmmyes3.12ASTM standards ASTM 123/153MaterialConnector bodies made of corrosion resistant, high strength aluminum alloy 99.5Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower partPressure pad: aluminum alloy; Spring washer: DIN127, steelConical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet 4.3The body material will be alloyof aluminum, bolts, washers and nuts of the fastening system of the staple will behot dip galvanized forged steel  yes4.3ACSR 556 conductor diameter. 4MCM not including the rod mm23.544.5Breaking loadkg 4.6The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted  0° o 30°.4.7Weight of zinc deposited on steelg/m²915 g/m².4.8Zinc weight deposited on bolts, nuts and washersg/m²400 g/m². 4.9Weightkg 4.1Dimensions and drawings yes4.11ASTM standards ASTM 123/1534.12Attach to the staple Norma IEC 60471.Stainless steel A2 bolts and nuts available according to order. 6.3The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper  yes6.4ACSR conductor section 556.4MCM mm²327.936.5Lengthm 6.6Breaking loadkg 6.7Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension." yes6.8Each rod that forms the joint must have a mark in its center with indelible ink  yes6.9Weight per unitkg /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1