The hay cutter adopts the principle of high-speed cutting to crush
it into segments at once, making it edible for livestock such as
cows, sheep, and horses. This machine can also crush crops such as
straw into crushed foam, suitable for breeding small livestock such
as ponies and lambs as bedding. The straw cutter adopts a fully
automatic feeding system, which can convert various straw and fresh
straw powder into ideal requirements according to needs. The
machine is mainly designed for green, wet, and dry straw. The
crushing particle size can be automatically adjusted.
Characteristics of the hay cutter1. The speed control gearbox
mechanism is easy to adjust, with reliable sealing and good
lubrication.2. The transmission part is equipped with external
centering rolling bearings and universal couplings, with a compact
structure, flexible operation, and convenient disassembly and
assembly3. The excellent feeding and conveying mechanism is
controlled by a switch, making it easy to switch and move forward
and backward freely.4. Domestic hay cutters with large models and
high production efficiency; Equipped with rubber tires, it solves
the awkward problem of large equipment moving without change.5. The
blade is made of high-quality steel with light craftsmanship and
high wear resistance; Use high-strength bolts for secure
connection.One machine with multiple functions, dry and wet
materials can be crushed, and the discharge can be adjustedThe
kneading machine has changed from the simple blade cutting of the
previous grass cutting machine to a far away one, transforming the
materials into uniform, soft, and finely broken silk pieces through
the functions of cutting, kneading, and rubbing in the room. At the
same time, automatic feeding and returning devices have been added
to prevent blockage and uneven feeding. When used as industrial raw
material products for biomass energy, biogas engineering, ethanol
extraction, papermaking, etc., the materials are soft and finely
ground, which is more conducive to post-processing such as
fermentation, and significantly improves production efficiency and
quality. This machine can also be used as a supporting equipment
for the drying unit. After being kneaded and cut, the material is
more conducive to moisture evaporation, shortening the drying time
and greatly improving production efficiency. Installation and
debugging1. The machine should be installed on a flat and sturdy
site during operation.2. Equip and install the motor according to
the specified requirements.3. Before installing the belt, it is
necessary to check whether the rotation direction of the index
power is consistent with the cutting direction of the lawn mower.
After confirming that there are no errors, adjust the installation
belt and ensure that the belt is properly tightened.4. After
confirming the normal adjustment of each part, connect the power
supply for trial operation, check if there is any looseness at the
connection of the fasteners in each part, and if there is any
abnormal sound in each rotating part.Safe operation and
maintenance1. The supporting power must meet the requirements and
it is not allowed to increase the spindle speed without
authorization.2. Before starting the machine; Check if the running
direction of the machine is the same as the hoe cutting direction,
otherwise it is strictly prohibited to start the machine.3.
Materials that need to be hoed and cut must not be mixed with hard
objects such as metal and stones, otherwise it may cause damage to
the machine.4. After a few hours of machine operation, it is
necessary to observe whether each component is loose and regularly
add grease to the bearings.5. When feeding materials, the
operator's hand is strictly prohibited from approaching the blade
to avoid personal injury accidents. The feeding should be evenly
and in moderation, not too much or too little, fast and slow.6.
During work, if grass blockage or other faults are found, the power
should be immediately turned off and the fault should be eliminated
before starting the operation. It is strictly prohibited to operate
the machine with faults.7. Non staff members and those who are not
familiar with the performance of the machine's mechanism are not
allowed to start the machine casually.8. When the machine is not in
use for a long time, it should be stored indoors or in a shed to
prevent rusting. /* March 10, 2023 17:59:20
*/!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about Wet and Dry Straw Hay Animal Feed Chaff Cutter Machine
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup