Agriculture Cutter Machinery Hay Grass Wheat Straw Stalk Chaff Cutter

The hay cutter adopts the principle of high-speed cutting to crush it into segments at once, making it edible for livestock such as cows, sheep, and horses. This machine can also crush crops such as straw into crushed foam, suitable for breeding small livestock such as ponies and lambs as bedding. The straw cutter adopts a fully automatic feeding system, which can convert various straw and fresh straw powder into ideal requirements according to needs. The machine is mainly designed for green, wet, and dry straw. The crushing particle size can be automatically adjusted.  Characteristics of the hay cutter1. The speed control gearbox mechanism is easy to adjust, with reliable sealing and good lubrication.2. The transmission part is equipped with external centering rolling bearings and universal couplings, with a compact structure, flexible operation, and convenient disassembly and assembly3. The excellent feeding and conveying mechanism is controlled by a switch, making it easy to switch and move forward and backward freely.4. Domestic hay cutters with large models and high production efficiency; Equipped with rubber tires, it solves the awkward problem of large equipment moving without change.5. The blade is made of high-quality steel with light craftsmanship and high wear resistance; Use high-strength bolts for secure connection.The kneading machine has changed from the simple blade cutting of the previous grass cutting machine to a far away one, transforming the materials into uniform, soft, and finely broken silk pieces through the functions of cutting, kneading, and rubbing in the room. At the same time, automatic feeding and returning devices have been added to prevent blockage and uneven feeding. When used as industrial raw material products for biomass energy, biogas engineering, ethanol extraction, papermaking, etc., the materials are soft and finely ground, which is more conducive to post-processing such as fermentation, and significantly improves production efficiency and quality. This machine can also be used as a supporting equipment for the drying unit. After being kneaded and cut, the material is more conducive to moisture evaporation, shortening the drying time and greatly improving production efficiency.  Installation and debugging1. The machine should be installed on a flat and sturdy site during operation.2. Equip and install the motor according to the specified requirements.3. Before installing the belt, it is necessary to check whether the rotation direction of the index power is consistent with the cutting direction of the lawn mower. After confirming that there are no errors, adjust the installation belt and ensure that the belt is properly tightened.4. After confirming the normal adjustment of each part, connect the power supply for trial operation, check if there is any looseness at the connection of the fasteners in each part, and if there is any abnormal sound in each rotating part.Safe operation and maintenance1. The supporting power must meet the requirements and it is not allowed to increase the spindle speed without authorization.2. Before starting the machine; Check if the running direction of the machine is the same as the hoe cutting direction, otherwise it is strictly prohibited to start the machine.3. Materials that need to be hoed and cut must not be mixed with hard objects such as metal and stones, otherwise it may cause damage to the machine.4. After a few hours of machine operation, it is necessary to observe whether each component is loose and regularly add grease to the bearings.5. When feeding materials, the operator's hand is strictly prohibited from approaching the blade to avoid personal injury accidents. The feeding should be evenly and in moderation, not too much or too little, fast and slow.6. During work, if grass blockage or other faults are found, the power should be immediately turned off and the fault should be eliminated before starting the operation. It is strictly prohibited to operate the machine with faults.7. Non staff members and those who are not familiar with the performance of the machine's mechanism are not allowed to start the machine casually.8. When the machine is not in use for a long time, it should be stored indoors or in a shed to prevent rusting.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1