CE Approved With PET two-Stage Automatic Blow Molding Machine (CSD-AB8-1.5L)

The features of Automatic Blowing Molding Machine Model CSD-AB: 1. Adopting imported servo motor ensures smooth performance and exact orientation. The running speed can be adjusted randomly according to the production requirement. With preform ray-inspection device, the clamping system would stop automatically while perform were absent. Blow molding machine, blow moulding machine. 2. Advanced Double-toggle clamping structure makes clamping force stronger. Electro-motion mold adjustment and auto-lubrication device ensure easy operation. 3. Special designed preheater offers wide use range for performs of different neck sizes. Adopting temperature control of layered infrared heating and PLC individual adjustment ensures even heat distriution and makes blow molding easier. When the temperature is over or lower than normal, the preform feeding device will pause automatically. It reduces the waste of raw material. 4. Color LCD screen PLC control panel saves a lot of bottle shaping technical data. All of the parameters can be adjusted successively on the touch screen during operation. No need to stop the machine for adjustment. Blow molding machine, blow moulding machine. 5. With the best design and fine manworkship, the machine is characterized by running smooth, easy operation and maintenance. 6. Auto-locking system protects machine from running under wrong conditions. Any mistake appears in any motion, hints will be shoun on the screen automatically. Meanwhile the machine will alarm and stop. The machine will restart automatically as soon as the problem was settled down. Long-distance-controlled computer supervises all of the procedures. In case the user met problems in production, the manufacturer would be able to provide technical service through long-distance-controlled computer. Blow molding machine, blow moulding machine. 7. With European Community Safety Attestation TUV CE Certificate. CSD-AB SERIES TWO-STAGE AUTOMATIC LINEAR HIGH-SPEED BLOW MOLDING MACHINEItemUnitCSD-AB8-1.5LMold Number 8Production capacity                                                  L≤1.5LProduction capacity                                                  Max Volume of Product(500ml)Pcs/h Preform Neck28-30mm9000Pcs/h(3.2s/cycle)Recommended Production Capacity Pcs/h8600-9000Pcs/h   Based on 500ML bottle,     Preform Neck 28-30mm, Weight:17gram,Thickness:2.3mm6700-7200Pcs/h       Based on 1500ML bottle,   Preform Neck 28-30mm, Weight:42gram,Thickness:3.3mmMax Diameter of ProductΦ(mm)95Neck Size of ProductΦ(mm)15-32Useful Area of Mould Platemm1080×400Max.Mould Thicknessmm257Min.Mould ThicknessmmMould Strokemm116Clamping ForceKn300Stretching Strokemm350Working PressureMpa0.8-1.0Blowing Air PressureMpa2.6-3.0Measurement of Main BlowerL×W×H(mm)9000×2000×1900Power of Preheaterkw200A295Actual Power of Preheater(based on 500ml bottlekw66A100Power of Main Blowerkw8A12Weight of Main BlowerT8Measurement of ConveyerL×W×H(mm)3600×2500×3500Weight of ConveyerT0.4High Pressure Air Compressor Unit Powerkw18.5×8PressureMpa3Discharging Capa.m³/min12Low Pressure Air Compressor Unit Powerkw22PressureMpa1.25Discharging Capa.m³/min3Air TankCapacitym³0.6×2Working PRESSUREMpa3Water ChillerCooling Capacitykcal/hr49800Compressor MotorHP15Air DryerCapacitym³/min12Working PRESSUREMpa3After CoolerCapacitym³/min12Working PRESSUREMpa3Air FilterOil Filter Odor Removal FilterCapacitym³/min12Working PRESSUREMpa3/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1