Low Noise High Injection Speed High-Speed Injection Machine with Iml Production of Auto-Parts

   The system pressure is increased to 17.5Mpa, the hydraulic system flow is increased and upgraded, and the low inertia high response servo system is adopted. It has the characteristics of large pipe diameter, short pipe length, fast response, low noise, strong power, etc., and the injection speed is fully improved.   1.The optimized designed 5-point toggle clamping structure has a central clamping effect and bigger opening stroke, lower axis-pin contact stress, more suitable for deep cavity product molding. It makes the clamping force acts on the mold directly, and avoids the disadvantage of outward toggle structure caused the inclination of mold-plate when making the long stroke and eccentric mold. The moving plate moves faster, more stable, and more controllable, and the machine dry cycle cycle is shorter. 2.The ultra-high rigidity square plate and tie-bar structure design caters to international mold design standards, improves mold adaptability, reduces principal stress, the plate force is more uniform, extends the life of tie-bar, and more effectively fit and protect the mold. 3.The front connecting rod interprated desigh and the toggle non-chuck structure improves the life of the machine and reduces the maintenance cost. The ejection stroke is longer, the ejection part is equipped with a forced retracting device as standard, and the ejection position can be adjusted freely. 4.Side-mounted new mechanical safety structure, more convenient to operate and safer to use.Боковая новая механическая конструкция безопасности, более удобная в эксплуатации и более безопасная в использовании        SP100/i180SP100/i390SP130/i520SP160/i650SP200/i810SP250/i1000SP300/i1620SP350/i2300Injection Unit ABCABCABCABCABCABCABCABCDScrew diametermm22252832364036404540455045505550556055606560657075Screw L/D ratioL/D21212123.6212123.3212122.5202022.2202022202021.8202021.6202018.6Injection capacity in theorycm³415367144183226203251318282357441357441534490593706688819962989116113461546Injection weight(PS)g384961131167206185228289257325402325402486446540643626746875900105612251407Injection pressureMPa439340271239189153230186147234185150229186153236194163239201171233198171149Injection velocityg/s486379719011194116147130164203167206249204247294232276324312367425488Plasticizing capacityg/s3.24.66.39121612182412172220243124314031384540485662Screw speedrpm300250270230210210210200                 Clamping Unit  Clamping forceKN1000130016002000250030003500Moving mould-plate strokemm350410470540580650750Max.Mould heightmm400460550600650700750Min.Mould heightmm150150180200250250250Space between tie-barsmm360x360420x420470x470530x530580x580630x630720x720Hydraulic ejector forceKN494967678787125Hydraulic ejector strokemm120120150150160160180Ejector numbern5559131313 Other  Pump pressureMPa17.517.517.517.517.517.517.517.5Driving powerKW1515223030374555Heating capacityKW710.510.9512.9513.5516.8318.1523Machine dimensionm4.16x1.18x1.784.23x1.18x1.814.53x1.25x1.955.30x1.34x2.105.70x1.47x2.176.04x1.60x2.287.14x1.75x2.47.4x1.9x2.3Machine weightt3.13.345.17.491014,5Oil tank capacityL235235253270280300400680                             /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1