Aluminium Profile End Milling Machine

Basic Info.Model NO.KT-313F/G/JTypeProfile Milling MachineObjectAll Kinds of ProfileStructureDesktopMilling Cutter TypeAngle Milling CutterMilling Cutter StructureIndexable TypeControlling ModeCopyingAutomatic GradeSemiautomaticPrecisionHigh PrecisionCertificationCE, ISO 9001Condition New TrademarkAlcoTransport PackageWooden CaseSpecification2200*1040*1640mmOriginChinaProduct Description  Adopted particular structure of triangular cylindrical sliding track, for high strength and rigidity.Move smoothly, stepless speed adjusting available, no creeping, the blade retract quickly, save non-production time.Operate easily, adjust size accurately, milling precision~0.1mm.With 4 pieces of milling cutters to mill out right work piece one time.4 pieces of milling cutters are installed in axes of 3 main electro motors, can adjust the height to fit for aluminum material.The workbench is large enough to mill 10~12 pieces profiles one time, high efficiency.7. Additionally can add one cutting blade as per the customer’s request.8.3 electro motors star up independently, could be selected as per work pieces’ requirement.9.38-90 series aluminum profile, heat insulation material and curtain wall profile could be milled. 10. Pneumatic spray mist blade lubrication coolant system.MAIN TECHNIQUE PARAMETER1.     Working air pressure0.6-0.8Mpa2.     Air consumption200 L/min3.     Main motor power2.2Kw×34.     Main motor rotation speed2840 rpm5.     Milling cutter dimensionΦ250×Φ50×6.5mm6.     Worktable dimension500x320mm7.Milling stroke950mm11.  Overall dimension (L×W×H)2280x1040x1640mm12.  Weight1300Kg Adopted particular structure of triangular cylindrical sliding track, for high strength and rigidity.Move smoothly, stepless speed adjusting available, no creeping, the blade retract quickly, save non-production time.Operate easily, adjust size accurately, milling precision~0.1mm.With 6 pieces of milling cutters to mill out right tenon one time.6 pieces of milling cutters are installed in shafts of 5 main electro motors, capable of front-rear and up-down adjustment according to processing requirements. Among them, 4 pieces of cutters accomplish processing horizontal tenons, one for vertically cutting and the 6th cutter for 0-45-degree positive/negative angle cutting.Five motors can be started independently, so you can choose working motor(s) according to tenon requirements.Big-area worktable, 6-8 pieces of profiles can be processed simultaneously for high efficiency and batch production.Capable of milling 38-90 series window materials, heat insulation materials and curtain wall materials.Automatic pneumatic spray mist blade lubrication coolant system.Utilizes big sealing protective cover to prevent deadheads from flying around.MAIN TECHNIQUE PARAMETER1.     Working air pressure0.6-0.8Mpa2.     Air consumption200 L/min3.     Total motor power3×2.2KW+2X1 .1 KW=8.8KW4.     Main motor rotation speed2840 rpm5.     Milling cutter dimensionΦ250×Φ50×6.5mm Φ300×Φ30×3.2mm Φ350×Φ30×3.2mm6.     Worktable dimension505x330mm7.Milling stroke1400mm11.  Overall dimension (L×W×H)3000×1 1 00×1 650mm12.  Weight1800Kg   Three-blade interface saw for sanitary ware materials Three tungsten carbide alloy saw blades comprise combined cutting tool. Tenon port can be milled correctlly on sanitary ware or curtain wall through once cutting stroke. the milling cutter can be adjusted at up-down direction and anterior-poster dircetion according to the needed size of tenon port. The vertical blade can be half increased for use in notch and cut off. Therefore, the processing scope is wider. The suitability is wide and productivity is high.MAIN TECHNIQUE PARAMETER1.     Working air pressure0.6-0.8Mpa2.     Air consumption200 L/min3.     Main motor power2.2Kw×34.     Main motor rotation speed2840 rpm5.     Milling cutter dimensionΦ300×Φ30×4.2mm6.     Worktable dimension500x320mm7.Milling stroke950mm11.  Overall dimension (L×W×H)2200x1 040x1 640mm12.  Weight900Kg