Gypsum Plaster Board Making Machine with PLC Control System

Gypsum Plaster Board Production Line with PLC Control System:1. Annual output:5million to 30 million sqm(based on thickness of 9.5mm gypsum board)2. Working time: 24hours/day and 300 working days/year3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue4. Fuel: Natural gas, diesel, heavy oil or coal5. Product quality and specification:1) The product is in compliance with National Standard GB/T9775-20082) Product specification:Length: 2400mm~3600mmWidth: 1200mm or 1220mmThickness: 8mm-20mm6. Main process:1)Raw material blending;2)Shaping;3)Wet board/panel conveying;4)Drying;5)Dry board/panel conveying;6)Finished product stacking and storage.7. Main technology:The production line adopts special designed hot air stove heating system8.Raw material consumption list:(Based on 9.5 mm gypsum board for reference)Gypsum6.8kg/m2Shielding paper0.48kg/m2Modified starch0.035kg/m2Foaming agent0.008kg/m2Glue0.005kg/m2Fiberglass(optional)0.025kg/m2Electricity0.3kwh/m2Water4.8kg/m2Light oil1,000,000kcal/hourNatural gas0.45m³/m2  Till now, we've manufactured and supplied complete sets of machine lines to Russia, Oman, Uzbekistan,United Arab Emirates, Iran.Payment conditions:30% (USD) prepaid by T/T as down payment;70% by irrevocable L/C at sighta).65% shall be paid against shipping documents at sight.b).5% shall be paid against performance guarantee at sight.What's more , Kunlun bank account available to make convenient for Iranian clientsProduction Method of Gypsum Board Production Line:This production line used  the  calcined gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. During the progressing process, the slurry is gradually dispersed with vibration, and jointed with back protective paper.  When going through extruded shaping machine, the slurry is fully wrapped by upper and lower paper, pressing into well-regulated flat board which is continuously brought forward as per a stable and strictly controlled speed. After any minutes , the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the wet gypsum board with a certain strength and regular shape is precisely cut into individual boards with set size by an auto-controlled cutting system. The individual boards are orderly arranged, turned over by program control system and brought into the dyer. In the dryer, the absorbed water in the boards is evaporated away. following strict drying system(The crystal water in the gypsum crystal has no loss). After brought out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turned over again, and the two ends are cut into boards with regular size and nice appearance by end sawing machine.  And finally the boards are conveyed to automatic stacking machine and stacked into well-ordered finished products before put into storage.About DCI:Hengshui Decheng Machinery & Equipment Co., Ltd, founded in 2008, is a comprehensive enterprise of machinery manufacture, research&development and investment casting. It has 218 staffs and 53 technical staffs including senior engineers, engineers and technicians. It covers 30, 000 sqm land, and has machining workshop, electrical workshop and precision casting workshop with complete sets of production and testing equipment. In 2008, it passed ISO9001: 2008 Quality Management System Certification. In early 2013, after on-site inspection and authentication by SGS, it became audited supplier of Made-in-China, and in May, 2013, it passed ISO/TS16949: 2009 "casting and machining for automotive parts" Quality Management System Certification.  Our company specially designs and manufactures complete sets of building materials equipments, such as paper surface gypsum board production line, gypsum powder production line (natural gypsum and chemical gypsum), fiber cement board production line, calcium silicate board production line, cement production line, AAC block production line, stone production line, etc. Certainly we also supply single machines, spare parts and wearing parts for these production lines; At the same time, we produce some raw materials for the production lines, such as modified starch, foaming agent, glue, etc.  Our company has well-experienced professional engineers and technical teams to ensure our clients with high-quality equipments. The well-skilled installation and commissioning team and high-quality process technologists provide our clients both at home and abroad with full set of technical services to make our clients "buy with reassurance and use with gratification". In recent years, our company has completed building materials equipment projects in the Middle East,