China LPG Propane Cylinders Butane Cylinder Tank Natural Gas Cylinder

Product DescriptionThe TEREK Pneumatic LPG booster pump system USES pure compressed air as the driving power source, and USES liquid booster pump as the pressure source. LPG and other liquid gas as the pressurized medium. The output pressure is proportional to the driving air pressure. By adjusting the pressure of the driving air source, the corresponding pressure of the pressurized LPG can be obtained. When the pressure of the driving source is balanced with that of the pressurized liquid, the pneumatic booster pump will be automatically stops and the output liquid pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.TEREK pump adopt aluminum alloy and stainless steel materials , We offer the most complete range of models in the industry measured, Such as: Capability of ultimate pressure, flow or output pressure. Compatibility with a broad variety of liquids ,such as oil ,water, LPG, corrosive liquid and chemical liquid applications. High quality seals, long service life available. Product parametersTEREK pumps feature is a large air piston joint to a smaller diameter piston. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios. TEREK model reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve. TEREK pumps are air driven at a drive air pressure of 2 to 8 bar (29 to 116 psi) by the normal air compressor.Refer to model technical parameters. Product namePneumatic booster pump LPG pressurized transfer and filling equipmentModelLG-LDD-04MediumLPG and other liquid gas as the pressurized mediumDrive air source pressure3-8 bar.Maximum outlet pressure32bar (32kg/cm2)When the driven air pressure is 5.0barHigh pressure outlet pressure is 20bar.When the driven air pressure is 6.0barHigh pressure outlet pressure is 25bar.Outlet pressure Control unitDrive air regulator valvePower sourceTEREK liquid booster pumpPressure control accuracyless than 1%F.S;Pressure measurement accuracy0.4 pressure gaugeValves and pipingHigh pressure needle valve and stainless steel pipingWeight40 KGExport wooden case Weight50 KGApplicationLPG transfer and pressurized fillingEquipment Dimension700*500*650 mmPacking size:800*570*690 mmPacking SpecificationsStandard export wooden caseConnection size(inch) Gas OutletNPT1/2  Internal ThreadProduction time12-15 days.System configuration: The LPG booster pump mainly consists of air drive chamber, pressurizing chamber, auto reversing valve, inlet check valve, outlet check valve, High quality sealing parts, air drive piston, pressurizing piston, silencer etc.TEREK LPG booster pump system mainly includes an air driven liquid booster pump, pressure gauges, liquid filter ,air filter, air regulating valve,control valves,pipelines, cabinet , pressure release valve etc.The main parts of the equipment are assembled in closed stainless steel cabinet or stainless steel frames. The pressure gauge,valve and pressure regulator will be mounted on the panel. The corresponding sign will also be marked on the panel. Detailed ImagesProduct advantages1. All pipes and fittings are made of stainless steel to ensure a long life2. The pump will stop working automatically when the output pressure reaches the preset value,3. Maintain long working hours with no energy expenditure4.No dissipated heat during the pressure holding phase5.No risk for explosion and spark in oil and gas field6. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.7. The working pressure can be adjusted by adjusting the pressure of the driven air. 8.Easy to install, move, use and maintainApplication Fields1.Pressure test with gas2.Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)3.Charging of gas cylinder and accumulator with nitrogen4.Supply for isolating gas systems5. High pressure gas injection system for various industries6.Transfer of oxygen cylinders7.Charging of breathing air bottles8.Leak test9.Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, gas bottles and air craft componentsPackaging & Shipping Our Services1. We'd like to provide our professional advice regarding