200L Double Layer Jacketed Glass Reactor

                            200L double layer jacketed glass reactorProduct introduction:This machine has electric constant speed stirring system, condensation and dropping system. The interlayer of kettle body needs to be connected with heating or cooling circulation equipment. When the material is stirred, the circulating hot solution or cooling liquid is injected through the interlayer to make the materials in the kettle are heated or cooled at a constant temperature. When the material is heated and reacted, the evaporation efficiency can be improved under vacuum conditions (a vacuum device need to be connected). The solvent vapor is cooled into liquid when passing through the glass condensing coil (a cooling device need to be connected), which can be refluxed into the kettle. It can also be recycled through the lower valve of the dean-stark. When the reaction is completed, the material can be discharged from the side outlet at the bottom of the kettle.This series of products need to be equipped with a vacuum device, a high-temperature or low-temperature circulation device to form system devices.Basic configuration:• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.• Using aluminum alloy + stainless steel material as frame body• Glass + PTFE discharge valve, side material discharge without effusion.• Low-speed power-increasing motor, electronic stepless speed regulation, fine adjustment by knob, speed control box with dual display function can digitally display the speed and the temperature of the material in the kettle.• The stirring system adopts ceramic bearings and mechanical seals to prevent the stirring rod from wearing out.• Using PT100 temperature sensor, 304 stainless steel material, wrapped by transparent PTFE tube outside , double anti-corrosion.• Vacuum pressure gauge shows real-time vacuum by pointer.• Crescent-type stirring paddle, 304 stainless steel + PTFE stirring blade; the material of the stirring rod is 304 stainless steel, and it is wrapped in PTFE tube outside.• There is a universal wheel with brake at the bottom of the equipment, which can be moved as a whole and be operated conveniently.• Fuse safety protection Technical parameter: ModelHEB-200LReactor volume200L, inner diameter 600mm, outer diameter 650mm, inner length 840mmInterlayer volumeAbout 40L Voltage/Frequency220V 50Hz/110V 60HzStirring motor power750W1/5Stirring speed0-280rpm/minTemperature range of reactor-80ºC~+250ºCTemperature measuring accuracy±1ºCVacuum0.098MpaKettle lidΦ340mm6 portsStirring portΦ60mm flange portCondensation reflux port50# ball mill portDropping stark port50# ball mill portPressure relief port34# standard portTemperature measuring portΦ45mm flange portSolid feeding portΦ80mm flange port, inner diameter Φ60mm matching PTFE coverStirring paddleΦ20×1300H(mm) blade 240mmCondenser Φ160mm×600H(mm), lower Φ60mm flange portCondensing area0.95Dean-starkUpper Φ60 flange port, left 50# ball mill stopper, right 24# standard port with multi-function valve, lower 50#ball mill plug valveDropping flask5L barrel shape, upper 29#standard port with air releasing valve×2pcs, 34#standard port with glass stopperCollection flask10L, upper 50#ball mill port, 24#standard port with air releasing valve×2pcs, lower glass material releasing valvePressure relief valve34#standard plug valve, releasing valve (pagoda joint) with 12mm outer diameterMaterial discharging portΦ100mm flange, Φ65mm material discharge hole; oblique discharging port (pagoda joint) Φ40mm; 300mm from the groundVacuum nozzlePagoda joint with 12mm outer diameter In and out circulating nozzle of condenser coilPagoda joint with 15mm outer diameter Overall dimension(W*D*H)1250×930×2800mmNet weight175KGPacking dimension2200×790×875mm   1385×880×910mmtwo wooden packages 2.63m³Packing weight271(159+112)KGPakage&Delivery:Factory:Certification:   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1