Galin/Gemaa Vibration/Vibrate Powder Coating/Spray/Paint/Box Feed Machine (OPTFlex-2B) for Easy Changing Color

Galin/Gemaa Vibrate Powder Coating Machine (OPTFlex-2B)for Easy changing color  [ PRODUCT DESCRIPTION ]    GALIN POWDER COATING MACHINE (OPTFlex-2B) ELECTRICAL DATANominal input voltage 110V240VACFrequency 50-60HzConnected load (without vibrator) 140 VANominal output voltage (to the gun) eff.10 VNominal output current (to the gun) max. 1.2 AConnection and output for vibrator(on Aux output) 110/230 VAC max. 100 WConnection for rinsing function (valve) 24 VDC max. 3 WTemperature range 0°C - +40°(+32°F - +104°F)Max. surface temperature 120 °C (+248 °F)Approvals II 3 D IP54 120 °C  GALIN POWDER COATING MACHINE (OPTFlex-2B)PNEUMATICAL DATAMAX.input pressure 10barMIN.input pressure 6barInput pressure(Dynamic based on pressure regulator setting) 5.5 bar / 80 psiMax.water vapor content of the compressed air 1.3G/Nm³Max.oil vapor content of the compressed air 0.1mg/Nm³Max.compressed air consumption 8Nm³/h   GALIN POWDER COATING MACHINE (OPTFlex-2B)PROCESSIBLE POWDERPlastic Powder: √Metallic Powder: √Enamel Powder: ×  GALIN POWDER COATING MACHINE (OPTFlex-2B)DETAILS1.Shape: Gema replacement,more user-friendly design2.Material:      a.Vibrating Tube: aluminium alloy with long service life     b.Gun Shell: same anti-static material with Gema GM03 to protect the high pressure from running away     c.Cascade Shell: anti-static materials are also adopted to protect the high pressure from losing,double protection to ensure high voltage stability     d.Nozzle:PTFE material, non-stick powder with long service(about 1 years)     e.Inner core:Glass glaze with better electrical conductivity3.Powder ascending rate: 85%~95% [ RELATED PRODUCTS ][ GALIN SERVICE ]1.Gun shell, different colors available2.Flat nozzles and round nozzles                                  3.Cascade(12V, 18V, 24V)                                           4.Cable (Length can be customized)                             5.OEM Service                                         [ APPLICATION AREA FOR POWDER COATING ]  Galin powder coating machine can be used for HubGalin powder coating machine can be used for FurniturGalin powder coating machine can be used for Metal RailGalin powder coating machine can be used for Metal productsGalin powder coating machine can be used for Glass productsGalin powder coating machine can be used for Metal or Glass CupGalin powder coating machine can be used for Any Metal or Glass you wantGalin Vibration/Vibrate powder coating machine (OPTFlex-2B) can be used for Change Color FrequentlyGalin Vibration/Vibrate powder coating machine (OPTFlex-2B) can be used for Colorful and Complex Piece[ ATTENTION ]  CLEANING AND MAINTENANCE OF POWDER COATING MACHINE(OPTFLEX-2B)     1.Daily Maintenance    1. Clean the injector  2. Clean the powder gun  3. Clean the powder hose and suction unit     2.Weekly Maintenance    1. Clean suction unit,injector,Powder Clean module and powder gun  2. Check the control unit grounding connections to the coating booth bolts,     the suspension devices of the work pieces,or the conveyor.TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-2B)If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged. Error/causeTroubleshootingInjector nozzle, non-return valve unit, powder hose orpowder gun are cloggedClean the corresponding parts and if necessary,replace themConveying vacuum too lowIncrease the powder quantity and/ or total air volume on the control unitInsert sleeve worn , not or incorrect insertedReplace or insert it ,observe the indexing camInsert sleeve is worm aftera short operating durationClean the nozzle ,if damaged,replaced itThe gun does not spray powder although the control unit is switched on and the gun trigger is pressed 1.Connect the machine to the compressed air    2.Clean /Replace                                            3.Clean the corresponding                              4.Contact Galin representative                        [ PROCESS ]  [ FAQ ]  Q: Can you provide the whole workshop automotive equipment?A: Yes, we can provide every equipment that needed.Q: Can I have a visit to your company before placing an order?A: Sure, welcome to visit us. Our factory locates in Nantong, Jiangsu Province.Q: Do you offer samples?A: You can take 1-3 inserts or nozzles in first order for testing.Q: What kind of support can I get if I am your agent?A: Bottom price, free catalogs and unique customization for marketing, and on site training.Q: What's the lead time?A: The lead time of our products is 2 ~10 days, depending on how many and what kind of equipment you ordered.Q: What is your payment terms?A: We can accept T/T, L/C,  Paypal, Western union, Moneygram,etc.Q: How long is the warranty?A: Our warranty is 12 months.Q: Can I order special color or special size that we need?A: Yes, the color and size can be customized as client's requests ,but some have quantity requirement.Q: Can I know how to assemble your spray booth or other equipment?A: