160t/2500 Delem Da66t Hydraulic Automatic Bending Machine Electric 6+1 Axis Press Brake

  Optional Control System  FeaturesStandard Equipment  Optional EquipmentDetails ImagesCNC press brake use all Raw material provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed and are standardized with an 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.Advantage:Safe and fast tool changeIt can be used without modifying Europe-type punchesFront clamp - vertical tool changeRear clamp - horizontal tool change  Press Brake 6-Axis CNC BackGauge with X1, X2, R1, R2, Z1, Z2-AxisBall screws and linear guide on X, R-axisMechanical accuracy ± 0.03 mmMechanical accuracy ± 0.03 mmAxes Z1‐Z2 speed 1000 mm/sAxis X1-X2 speed 500 mm/sAxis R1-R2 speed 500 mm/sLoad capacity - 300 kg per support  Proportional valve:The German fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation.Advantage:The frequency response (response frequency) is higher and can be as high as 200Hz.It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes.Closed-loop control, the signal feedback.Original German imported products, longer service life.  Italy DSP Laser Protection:DSP® laser protection will be necessary if you have a high requirement for safety.Advantage:Laser protection, Multibeam Receiver.Protective areas, Front, center, and rear.The safety level is CAT.4 and SIL3.Detection Case protection degree: IP 65.Laser classification: class 1 M.Response time: 5 ms.Change Speed Point: 5mm + Stopping Space.The maximum protective distance is up to 15M.LED indicators show various states.  Product ParametersModelBending Pressure (KN)Bending Length (mm)Uprights Distance (mm)Throat Depth (mm)Slider Stroke (mm)Max. Opening Height (mm)Y-axis Downward Speed (mm/sec)Y-axis Back Stroke Speed (mm/sec)Bending Angle PrecisionMax. X-axis Distance (mm)Workpiece Straightness (mm)Backgauge Accuracy (mm/m)Main Motor (KW)Length*Width*Height (mm)Weight (kg)30T/160030016009502301003208070