Environmental Protection Glue for Wood PU Leather Rubber Plastic Adhesive Glue 285h Graft Glue Production Line

Production line characteristic1 )JCT machinery and Equipment Co., Ltd. is a professional manufacturer specializing in design, production, installation and commissioning. It has more than 20 years of design and production experience, advanced design, well made,the products are sold to all over the world.. 2)The grafted adhesive production line designed by JCT is communicated with a number of experienced grafted glue technology engineers. After design, the production line has high production efficiency and low production cost. It can realize semi-automatic or automatic control according to different customer requirements.production line equipmentReaction kettle, condenser, dispersing kettle, filter, filling machine, steam furnace, water cooling system, material pump, etc. Model Chamber Volum(L)Drive motor power(KW)Mixing Speed (rpm) Discharge mode HeatingFull volumeFeeding amountPaddle fast / slow paddle Optional parametersOptional parameters NHZ-5532.2-475/50Manual / Hydraulic tiltingRunning HotoilElectrical heatingPressure SteamNHZ-2020123-5.563/42NHZ-5050304-7.563/42NHZ-100100605.5-7.543/29NHZ-2002001207.5-1543/29Hydraulic tiltingThe bottom pumpingScrew extrudingNHZ-30030018011-18.543/29NHZ-50050030018.5-3043/29NHZ-1000100060022-5532/22NHZ-1500150090030-9032/22NHZ-20002000120045-11032/22NHZ-30003000 1800 55-130 33/22 Remarks:1,Temperature range: 0-300°,2, Pressure range:-0.1-0.6MPa,3,Inverter for frequency control if necessory.  Production process1).All kinds of raw materials are prepared according to the technical formula. 2)Add butanone, xylene and other solvents to the reaction kettle to stir and stir. 3)Add chloroprene rubber, continue heating heating, high speed; 4)After the rubber is dissolved, the other raw materials are added to heat up and react. 5)When the viscosity is detected and the requirements are reached, other raw materials are added. 6)Cool down the cooling water to the specified temperature. 7)Pump the finished product into the high speed dispersion kettle. 8)Other raw materials such as resin are added to adjust the viscosity and solid content. 9)After sampling and testing, the cooling is cooled and the material is packed  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1