Automatic Control System Hydraulic Cone Crusher

The multi-cylinder hydraulic cone crusher is a typical crushing device for medium and fine crushed hard materials. It is developed on the basis of the spring cone crusher, and its basic structure is similar to that of the spring cone crusher. Used in mining, metallurgy, construction, chemical, electric power, transportation and other industries.Structure and compositionThe multi-cylinder hydraulic cone crusher mainly consists of a fixed cone part, a moving cone part, an eccentric sleeve part, a transmission part, a frame part, an adjustment ring part, a feed bin part, a discharge port adjustment part, a lock protection cylinder part, and a fan part. , motor department, hydraulic station, lubrication station and special tool parts.The multi-cylinder hydraulic cone crusher is developed on the basis of a spring cone crusher, and its basic structure is similar to that of a spring cone crusher. The difference between the multi-cylinder hydraulic pressure and the spring cone crusher is only the original 10-16 sets of springs, which are replaced by 10-16 safety cylinders. It consists of a cylinder, a piston, a bracket and a bolt. The cylinder is divided by the piston into two chambers A and B.The working part of the multi-cylinder cone crusher consists of two truncated cones. And it is in the upright state. The over-iron protection device of the multi-cylinder hydraulic cone crusher is a plurality of hydraulic cylinders, and is integrated with the locking protection device, and is installed at the upper and lower machine joints. The structure is more complicated, and it has good effect on high-hardness ore crushing, and is mostly used for medium and fine crushing operations of mines and rocks.Technical parameters:ModelCavity (coarse/fine)Close Side feed opening(mm)Min CSS (mm)Capacity (t/h)Power KW(HP)HPT300C1 Extra Coarse23025220-440250(350)C2 Coarse21020190-380M Medium15016175-320F1 Fine10513110-260F2 Extra Fine8010100-240HPT500C1 Extra Coarse33038425-790400(500)C2 Coarse29030380-700M Medium21022330-605F1 Fine13016270-535F2 Extra Fine9513200-430HPT800C1 Extra Coarse35038545-1200630(850)C2 Coarse30032495-1050M Medium26525470-950F1 Fine22017385-730F2 Extra Fine15014310-600F3 Extra Fine9010260-550working principleThe multi-cylinder cone crusher is a typical crushing device for medium and fine crushed hard materials. When working, the moving cone makes a swinging motion along the inner surface. Near the fixed cone, the material is crushed by the extrusion and bending of the moving cone. When the moving cone is offset, the broken material falls from the bottom of the cone due to gravity. The crushing and discharging processes are successively performed sequentially along the inner surface. The lock protection cylinder is composed of a plurality of lock protection cylinders, an over-iron protection accumulator, a buffer accumulator group and a pipeline. The locking protection cylinder mainly functions as iron protection and cleaning the crushing chamber. Each two hydraulic cylinders are equipped with a buffer accumulator. When the normal crushing is used, the adjusting ring jumps due to a few hard materials during the buffering. The multi-cylinder hydraulic cone crusher is realized by hydraulic device because of its insurance, adjustment and locking. Therefore, it has the following characteristics like the single-cylinder hydraulic cone crusher: it is convenient to adjust the discharge port, and the overload factor is small when passing through non-broken objects. It is easy to take out non-broken objects that are clogged in the crushing chamber. Production practice shows that this hydraulic cone crusher has good performance. However, compared with a single cylinder, the crusher has a complicated structure and a manufacturing man-hour is higher than a single cylinder.The spring hydraulic cone crusher has a hydraulic system to adjust the size of the crusher discharge port, and the hydraulic system can effectively ensure the safe operation of the equipment. When there is foreign matter in the crushing chamber, the hydraulic system can automatically lower the moving cone. When the foreign matter is discharged, the system automatically resets the falling moving cone. Re-maintain the original discharge port position and continue to work.(1) Increase the eccentric moment and improve the processing capacity;(2), speed up, increase power, increase the fineness of crushing;(3), raise the moving cone selection center, optimize the cavity design;(4) Thickening of the lining plate to extend the life;(5), the hydraulic motor replaces the hydraulic push rod device, and the fixed cone assembly is removed in 10 minutes;(6) High production and mineral content;(7), the key components are made of high-strength materials, and the weight is increased appropriately, and the reliability is higher.   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1