Rail Mounted Container Gantry Crane

 Product Type: RMGLifting Capacity: 35ton under spreaderSpan Length: 16mWorking Class: A6, A7, A8Ambient Temperature: -25~40°CProduct Type: RMGLifting Capacity: 35ton under spreaderSpan Length: 16mWorking Class: A6, A7, A8Ambient Temperature: -25~40°CRail mounted gantry crane is a kind of rail mounted crane used to offload, stack and load 20ft, 40ft, and 45ft ISO standard containers. Its provision of power is offered by cable reel. The crane contains three mechanism: hoisting, trolley travelling and gantry travelling. The trolley running along the track mounted on gantry beam is capable to serve among legs. The rail mounted gantry crane is able to make straight movement along rails. Design conditionLifetime   20 yearsLoading cycle2 million  The crane is equipped with appropriate flexible hydraulic container spreader, which is connected to trolley through the upper frame and wire rope system. And the hydraulic power comes from spreader itself, and we just provide the power supply and communication.   Hoisting mechanism and trolley travel are able to work simultaneously or separately with load: the same applies to gantry travel and trolley travel.  Electrical drive of main working mechanism is equipped with full digital AC frequency convertor, PLC speed governor and constant power adjustment device for hoisting mechanism.  The crane has a monitoring and management system. It has the function of data collection, analysis, management, and fault diagnosis and is also able to deliver the main parameters and operating conditions to the electrical room, cabin and control center for monitoring and control.Modular DesignThe component of crane are designed into various series standard modular. And different modular can be assembled to different products.All the modular components can assembly and disassembly for good transportation.Standard modular components can be manufactured with short producing time and steady quality. So that we can short the delivery time.Advanced Manufacturing TechnologyBoth side of all the steel plates of crane are pretreated by pretreatment production line, Sand blasting-Primer spray-Primer drying. Eliminate the inner stress of steel plate, increase the adhesive force of the steel structure. Ensure the appearance and anticorrosion quality.Steel plate cutting adopts whole sets Messer CNC plasma cutting machine from Germany, with very fast cutting speed, little deformation, high deformation, high precision, deviation could be controlled within 1mm, it ensure the raw material at high quality standard and can reach top level in the industry.The welding of main beam adopts high efficiency and intelligent welding robot, Weihua are NO.1 enterprise who adopts this high technology machine. The welding joint inside of the main beam adopts advanced MAG welding, adapt Ar+CO2 mixed protective gas, The 4 welding joint outside of the main beam adopts automatic submerged-arc fillet welding machine. The welding of main beam adopts radiographic inspection and ultrasonic flaw detection for the welding joint and fillet weld position.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1