Mini CNC C02 Laser Engraver with CCD Camera Lightburn Autofocus

  Mini CNC C02 Laser Engraver with CCD Camera Lightburn Autofocus AEON MIRA 5 is a hobby-grade desktop laser engraving machine. The working area is 500*300mm, with a water cooler, exhaust fan, and air pump built inside of the machine which is very compact, clean, and modern. To be a hobby-grade model, the water cooler may not be very effective, as it is not compressor type. You can not run it continuously over 4 hours, or the water temperature will be too high.It is designed more focused on engraving than cutting, therefore, there is no blade cutting table for this model. But that does not mean you could not cut at all. You could cut plywood, MDF, leather, paper with this machine very well. Only that when cuts the acrylic or other plastic materials, better to put some solid flat objects underneath to make the acrylic not in contact with the honeycomb table so that it won't burn the bottom of the acrylic. The MIRA 5 might be the most powerful hobby machine you could find on the market. The engraving speed is very fast, up to 1,200mm/sec. The acceleration speed is 5G. Also, the dust-proof guide rail ensures the engraving outcome is perfect. The red beam is the combiner type, which is the same as the laser path. Further, you could choose autofocus and Wi-Fi to get an easier operation experience.Overall, the MIRA 5 is ideal for those who got limited space and want the best hobby-grade desktop laser engraving machine in his/her room.Product Parameters  ITEMDATAWorking Area:500*300mmLaser Tube Power:40W/60W/RF30WLaser Tube Type:CO2 Sealed Glass Tube/RF Metal TubeZ Axis Height:100mm AdjustableInput Voltage:220V AC 50Hz/110V AC 60HzRated Power:1200W-1300WOperating Modes:Optimized Raster, Vector and Combined ModeResolution:1000DPIMax Engraving Speed:1200mm/secMax Cutting Speed:1000mm/secAcceleration Speed:5GLaser Optical Control:0-100% Set by SoftwareMinimum Engraving Size:Chinese Character 2.0mm*2.0mm, English Letter 1.0mm*1.0mmLocating Precision: