Fiber Extender/Switch - DVI/VGA- USB2.0- Audio - Serial

Customization for   DVI CATx, HDMI CATx, DVI FiberFiber Extender/Switch • DVI/VGA • USB2.0 • Audio • SerialExtends Full HD digital or analog video with visually lossless qualityTransparent USB 2.0 device supportUnits can be run point to point as extender or through gigabit Ethernet switch to form distributed matrix switchTransmitter and Receiver connect to each other or gigabit Ethernet switch with multi-mode fiber up to 1640ft (500m) or single-mode fiber up to 12.4mi (20Km)Input and output video resolutions up to 1920×1200@60 HzBase model supports digital video and USB 1.1 devices (keyboard, mouse and other HID devices) at rates up to 12MbpsOptional USB 2.0 high-speed device support for higher speed devices, such as flash sticks, cameras, scanners, and printersOptional bi-directional analog audio, RS232 serial port, and VGA inputLocal monitor output at the transmitterFirmware upgrade requires no special cableDDC menu to choose remote display EDID or any of 5 fixed settingsOSD menu functions allow option activation, firmware updates, monitor synchronization, and OSD locking4 units can be mounted in a 1U 19" rack Digital Extender supports DVI or VGA at 1920x1200 with high quality compressed video over CATx or fiber cable. The standard unit comes with DVI-D video and USB1.1/USB2.0 up to 12Mbps. The link cable can be either CATx, multi-mode fiber, or single-mode fiber. The optional VGA, USB2.0 device support, audio, serial and switch mode functions are configured on the standard chassis using software keys to activate the selected options. With the VGA option activated, video input is via the DVI-I (VGA) connector on the transmitter unit, with VGA output on the local port. The video output on the receiver unit is always DVI-D. With the USB2.0 device support activated, the unit will support transparent USB2.0 up to 64Mbps. The audio and serial options support bi-directional data transmission. The analog audio uses standard 3.5mm stereo audio jacks, and the RS232 serial is implemented on an RJ12 connector.The Switch Mode option enables up to 48 Xcion devices (transmitter and receiver) to be connected to each other using a dedicated gigabit network switch, creating a distributed KVM switching system where any user can access any connected host computer resource. Multiple users can also access a single PC/Server using a limited command structure.Management of the Caratar DVI extender is through an extensive OSD menu structure that is displayed on the connected monitor and operated via keyboard commands.PART NUMBERS2DFMUD1D multi-mode Fiber Extender Kit with DVI/USB2DFSUD1Dsingle-mode Fiber Extender Kit with DVI/USBT USB2.0 High Speed Option (64Mbps)AS Analog Audio/RS232 Serial OptionV VGA OptionSM Switch Mode Option for distributed KVM switchingSPECIFICATIONSDimensions (W x D x H)3.88" x 4.17" x 1.6" (98 x 106 x 41 mm) (1U)Weight1.19 lb (0.54 kg)Power100-250 VAC 50-60HzExternal adapter, +12V, 1ATransmitter or Receiver: 5WResolutionDVI video: 1920 x 1200HDMI video with DVI adapter: 1080pVGA video: 1920x1200DistanceMulti-mode (OM2) fiber: 1,640' (500m)Single-mode fiber: 12.4mi (20Km)ConnectorsTransmitter:DVI video: DVI female, Input and LocalVGA video: DVI-I femaleUSB 1.1/2.0: USB Type BAudio: Two 3.5mm stereo audio in/outSerial RS232: RJ12 jackFiber link: Duplex LC (fiber model)Power using external adapter: Barrel jackReceiver:DVI video: DVI femaleUSB 1.1/2.0: Four USB Type AAudio: Two 3.5mm stereo audio in/outSerial RS232: RJ12 jackFiber link: Duplex LCPower using external adapter: Barrel jackControlsUnit power: Red/Green LEDLink Status: Red/Green LEDOSD: via keyboardEnvironmentOperating temperature: 32°F-113°F (0°C-45°C)Storage temperature: -4°F-158°F (-20°C-70°C)Relative humidity: 0%-80%, non-condensingIntroducing our Fiber Extender/Switch - DVI/VGA- USB2.0- Audio - Serial, a cutting-edge solution designed to meet the demanding needs of businesses in the digital era. This versatile product is perfect for B2B platforms, offering a seamless and reliable extension of DVI and VGA signals over long distances, ensuring optimal connectivity and enhanced productivity. With the Fiber Extender/Switch - DVI/VGA- USB2.0- Audio - Serial, you can effortlessly extend DVI and VGA signals up to 10 kilometers using fiber optic cables. This allows you to connect remote displays, projectors, and other devices without compromising on signal quality or resolution. Say goodbye to the limitations of traditional copper cables and embrace the power of fiber optics for superior performance. Equipped with USB 2.0 ports, this extender/switch enables you to connect USB devices such as keyboards, mice, and touchscreens, providing seamless control and interaction with your remote systems. The inclusion of audio and serial ports further enhances the versatility of this product, allowing for the transmission of high-quality audio signals and the integration of serial devices into your setup. Our Fiber Extender/Switch - DVI/VGA- USB2.0- Audio - S