10gige 25MP 40fps Industrial Camera

25MP 40FPS Microscope Camera USB Industrial Electronic Digital Microscope for Phone Repair PCB Soldering   Product Description  FeaturesCMOS camera Matrix Type: CMOSColor: Monochrome Pixel cell size: 2.5x2.5 microns Signal-to-noise ratio: 40 dB Full matrix resolution: 25MP (5120 x 5120) Maximum shooting speed: 40 fps Data transmission interface: 10GigE   Product ParametersType2500M-C2500M-M582500-C2500-M58Len mouthC mouthM58 mouthC mouthM58 mouthPixel25 million CMOS, black and white, 2.5 × 2.5 microns25 million CMOS, color, 2.5 × 2.5 micronsOptical size12.8mm x 12.8mm, 1.1 inches, 18.1mm diagonalshutterGlobal shutter, progressive scanResolution and Frame RateResolutionRatesimage scale5120 x 5120401:1ROI of any size, down to 32×32exposure time9us ~ 4817msGain range1x-14xfull well charge6.5kesignal to noise ratio37.9dBDynamic Range68dBdark current1e/s/pixel @30ºCresponse spectrum390nm ~ 650nmImage bit width12bitimage formatMono/Raw(8bit/16bit), 24bit BMP format(BGR24)multi-cameraSupport 4 units to work at the same timetrigger modeSoftware/hardware trigger, pulse width controlled triggerCamera IDThe camera is factory written into the ID, and the user can also write the ID in the cameraExposure functionManual exposure / automatic exposure / area exposure / external pulse width control exposureFlat field functionSupport, 4 sets of flat field parameters can be saved inside the cameraprogrammable controlExposure Time, Gain, Anti-flicker, GAMMA, Contrast, Black Level, Sharpness (supported by black and white cameras only), 2D noise reduction (supported by black and white cameras only), 3D noise reduction, RGB gain (supported by color cameras only), white Balanced (only supported by color cameras)Image ProcessingImage processing by the camera's internal ISPsoftware interfaceSDK, GigE Vision, GenICam, DirectShow, TWAIN, SDK to Halcon/Labview pluginsupport systemWin7/8/8.1/10 (64bit), does not support 32bit; Ubuntu/debain (based on the version of kernel driver above 3.13.0)Data interface10Gbps optical interface (LC interface)Trigger interface12Pin Hirose interface, 1 optocoupler isolation input/1 optocoupler isolation output, one non-isolated 5V bidirectional IOProduct power10-25V power supply, power consumption 7W (typ)working environmentTemperature: 0ºC~40ºC; Humidity: 10%~90%RH (non-condensing)storage environmentTemperature: -20ºC~60ºC; Humidity: 10% - 60%RHsizeM58 interface: 57 x 57 x 100.5mm; C interface: 57 x 57 x103.9mmweightM58 interface: about 470 grams; C interface: about 493 grams (both include optical modules)Standard accessoriesPCIe network card, 3m trigger cable (connected to AC to DC power supply), 3m armored fiberEMC performanceESD contact discharge 8KV without frame loss; EFT 2KV without frame lossExecutive standardCE / ROHS /IP50Fan life60000 hours   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1