4.3 Inch LCD Driver Module with Controller Board for Video Doorbell

Model NameTFT LCD MODULEModel No.ZY-VM401-V.0Signal SystemPAL/NTSC LCD Size4.3 inchStructureLCD DISPLAY+CONTROLLER BOARDApplicationvisual doorbell,video telephony, automotive displaysQualityA      When Brightness, Color or Contrast was selected, the value and progress bar of the current Settings were displayed on the screen. Press UP or Down to adjust the Settings as shown in the following figure: When Delete All is selected, press the UP or Down key to enter the screen for deleting files. Delete all file is displayed. , "No file" is displayed when there is no photo in the memory. When Format Card is selected, press the UP or Down key to enter the Format prompt interface as shown in the following figure: Then press UP or DOWN to switch No or Yes. If Yes is selected, press the Menu key to Format Card. When the selected item is Copy, press UP or Down to copy the memory photo to the TF Card. When there are many files, you can see the file copy progress prompt, and when there is No TF card, you can see No Card. If Exit is selected, press UP or Down to exit the menu. Long press the menu key to save and exit. In the monitoring state, there is a green icon prompt in photo mode or a green icon prompt in video mode in the upper left corner. When TF is inserted, there is a green TF card icon in the upper right corner of the screen. There is a red prompt in the top left corner when taking a photo and a green prompt in the top right corner when there is a new photo in the photo mode. There is a red note in the top left corner when recording. There is a green date and time prompt in the lower right corner. Press the MENU key to exit to Monitor mode while viewing mode or menu display. When viewing the mode there is a green 14/21 in the bottom left corner which file is currently/how many files are there in total. In the lower right corner is the time of the photo or the time of the video recording. When there is no menu in the monitoring state, press the menu key for a long time. If there is no software for upgrading in the TF card, the current version number will be displayed on the upper left of the screen. If there is software for upgrading, the prompt upgrade interface will be displayed as follows: Resolution480*3(RGB)*272Display modeTFT Viewing Area95.04(W)53.85(H)mmDot size0.066(W)*0.198(H)mmAspect Ratio16:9Viewing Angle50/70/70/70Scope of input signalStandard:Vp-p,Minimum:0.5 Vp-p ,Maximum:2.0 Vp-pWorking VoltageStandard:12VVoltage Range9V-18VCurrentDC100mA±20mA( DC12V supply)W≤1.5WLaunch Time≤1.6S  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1