2.0 4kx2K 60Hz 18.0gbps 10m 4: 4: 4 10m HDMI Fiber Cable

Basic Info.Model NO.2.0 4Kx2K 60HzGenderFemale-FemaleInterface TypeDINApplicaitonHDTVColorAvailableModel NumberWl-Hf102ApplicationComputerOuter Diameter4.8mmConnector TypeHDMIKey Feature2Support 4K*2KWarranty12 MonthsTypeOptical FiberConnector ColorGoldShieldingFoilKey Feature1HDMI 2.0 StandardKey Feature318.0gbps High SpeedCertificationCe FCC RoHSPortGuangzhou/ShenzhenMOQ1 PCTrademarkWolon or OEMTransport PackageOne Piece Packed in a OPP Plastic BagSpecificationHDMI 2.0 4Kx2K 60Hz 18.0Gbps fiber cable 16m 4:4:4OriginWuhan, ChinaHS Code854470000Product DescriptionHDMI 2.0 4Kx2K 60Hz 18.0Gbps fiber cable 16m 4:4:4SpecificationInterface: HDMI A Male to HDMI A MaleHDMI 2.0 standard.  Backward  compatible  with  all  previous  HDMIVersions.4K x 2K Support - Supports ANY resolution to 4K (4096x2160 and 3840x2160) at 60Hz. (YUV4:4:4 4k@60Hz)Full 3D SupportTV oversampling refresh rates (such as 120Hz) 4K, as well as 3D, 2K, 1080p, 720p, 480p and moreHDCP 2.2; EDID; CEC18.0Gbps high speed32 Uncompressed Audio Channels; 1536kHz Sample RatesARC (Audio Return Channel) Port-powered: No external power needed Cable Diameter: 0.19 inches (4.8 mm)Power Consumption: 250mWBending Radius: more than 20mmOperating Temperature: 0-55ºCStorage Temperature: -20-80ºC Troubleshooting1.If no disparately, please check if the"source" and "display" connectorsare plugged into the correct device, if correctly, please re-install the HDMI driver.2.If unstable display, please plug the connectors again to make sure the connectors are fully plugged and then check if the fiber cable is seriously bent.3.If the splash screen or snowflakes happen when using 4K @ 60Hz,please check whether you have have used something like adapter or converter, if yes, please remove the adapter or converter and then plug this fiber cable directly.4.If there is no image or black screen happens when connecting some Samsung individual display device, please turn off the source device and TV power first and then reset them five minutes later. Notice1.This fiber cable can not be reversed or dismantled.2.It can only be connected with the HDMI standard A interface, not MHL interface.3.Do not pull the cable by force When plugging and unplugging the connector.4.Please check whether the your device supports HDMI to DVI when turning HDMI signal into DVI signal5.The cable can not be over-bent in a small range and the bending radius must be more than 20mm.