Big Air Flow Terminal Fan Coil with Cooling and Heating

Chilled Water Fan Coil UnitCharacteristicsEfficient and energy savingEfficient ABS blower which is light weighted while statically and dynamically balanced. Excellent thinwall copper tube and efficient hydrophilic aluminum fin are under water pressure bonded treatment. Patent inverse crossing circuit to reach the best heat transfer efficiency. Brass water distributor is used for improving water flow distribution, in order to provide better heat transfer effect. Quiet operationLow noise and permanent capacity motor, unique ABS centrifugal blower, all of them pass dynamically balance test, to ensure unit operate quietly and efficiently. 3-speed motor, ball bearing, long lifespan; rubber vibration isolator reduces operation noise. Stable and reliableU-shaped tube bending, reducing soldered dot and leakage point. Drain pan is made of high grade stainless steel plate, modeling processing; surface has been under hot dipped electroforming painting treatment. 7mm PE thermal insulation foam is applied on the drain pan to prevent condensation and leakage from occurring. Furthermore the width and length of the drain pan has been specifically designed to accommodate the water drop from the water inlet/outlet and electrically operated valve. There is fuse in power supply inlet side to prevent motor burned because of wrong wiring. Reliable and stable motor which enjoys good reputation in the market. Different models• Static pressure: 12Pa, 30Pa, 50Pa. • Fan coil unit series: horizontal exposed type, horizontal concealed type, vertical concealed type, vertical exposed type, cassette type, large air volume FCU. • Accessories: 3-speed switch, return air box, extended drain pan, electronic two-way valve, electrical heater, air cleansing module. All above are for your selection. Technical Data (Ceiling Concealed Type)   Model34WA51WA68WA85WA102WA136WA170WA204WA238WARated air volume [m³/h]H34051068085010201360170020402380M2553835106387651020127515301785L17025534042551068085010201190Rated cooling capacity [W]H18002700360045005400720090001080012600M1440216028803600432057607200864010080L117017552340292535104680585070208190Rated heating capacity  [W]H2700405054006750810010800135001620018900M216032404320540064808640108001296015120L17552633351043885265702087751053012285Input power  [W]12PaH375262768613415218922830PaH4459728710015617421225350PaH496684100108174210250300Noise    dB(A)12PaH37394143454648505230PaH40424446474850525450PaH424446474950525456Water volume  [kg/h]3905507008209101340159018002070Water pressure loss [kPa]≤30≤30≤30≤30≤40≤40≤40≤40≤50Weight  [kg]Without plenum box12.5141415.516.522.5303333.5With plenum box14.5161719.520.527.5353839.5MotorTypeE class insulation, permanent capacitor, 3 speed fanQty111112223FanTypeDouble inlet, forward curve, multi blades, centrifugal fanType122223444Water connection pipe3/4"   (DN20)Condensed water pipe3/4"   (DN20)Max working pressure1.6MPaPower supplyAC 220V/50HzNote: 1. Cooling capacity is based on air inlet temperature 27oC DB/19.5oC WB, entering water temperature 7oC, T5oC. 2. Heating capacity is based on air inlet temperature 21oC, entering water temperature 60oC, air flow volume and water flow rate are the same with cooling mode. 3. MPT-Mole pipe thread, FPT-Female pipe thread. 4. ESP for C and F series is 0Pa. 5. For FVE, FVC series, there is no Model 140; the performance parameters of FVE and FVC are the same with FHC. 6. Specifications in this catalog are subject to change without notice.   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1