Leasy EU 150L-300L All-in-One Air-to-Water Air Source Water Heater

Basic Info.Model NO.KRS38AEnergy Efficiency GradeOneHeat Temperature75 Max.Work EnvironmentCommon Heat PumpHeat SourceAir-sourceHeating TypeMulti-power HeatApplicationVilla Family, Sauna and Swimming Pool, Hotels, Factory Hospital, Student Apartments, Beauty Salons, HouseholdCertificationISO9001, CCCTank Capacity150L-300LMax. Water Temperature75cTrademarkLEASYOriginChinaProduct DescriptionProduct Name:LEASY High-temperature Silence-type Air-source Heat Pump All-in-one Water HeaterFor European market Product DescriptionProduct Selling PointEven for large houses, a water heater is enough.Level 1 energy efficiency,Compared with the traditional electric water heater, 75% savings in electricity billsLow energy consumption, which is only 1/3 of gas water heater and 1/2 of the solar water heater. Product Introduction: This product is mainly suitable for apartment penthouse users.. The air-only source heating mode can reach 65ºC, while the highest water temperature can reach 75ºC. High temperature hot water capacity increasing and antibacterial effect can solve the pain point of health hot water quality. It can realize no cold water and no waste of hot water, open-hot. Main features:1.    Level 1 energy efficiency, electricity saving 76%Under standard working conditions, high COP design, compared with electric water heater, Each kw/h of electricity can produce more than four times the heat which equals electricity saving above 76%.2.    Library level silence 42dB3.    High efficient heat transfer, electricity and water separatedBy using efficient cellular array structure and flexible fitting process, the heat exchange area is larger and the heat transfer effect is better; Moreover, the performance is more lasting, the system energy efficiency level can reach above A. The heat exchanger is not in contact with the water in tank without any risks of corrosion, scaling or leakage, etc. The whole body adopts intelligent high pressure foaming, and the insulation layer is meticulous, uniform and tight, which greatly improves the heat preservation efficiency and delays the heat loss, as well as improves the energy efficiency of the system.4.    Higher water temperature, Larger amount of hot waterThe heat pump heating mode can reach above 65ºC; The usage amount of hot water is 30% more than the ordinary model.5.    Special compressor, strong and more stableCompressor special for heat pump, compared with the traditional air conditioning compressor, it has better wear resistance performance and a wider operating range. It can deal with the external environment changes and release lasting power.6.    Enamel water tank, more healthier water quality, longer service life, more stable performanceEnamel water tank features pressure resistance, fatigue resistance, long service life and no deformation after 280K times of pressure-bearing pulse test, far above China's national standard. Enamel has good adherence strength, acid resistance, alkali resistance, corrosion resistance and hot water corrosion resistance. The water quality is clean.7. Top air-out designTop vent desighed for European market. Do not affect the surrounding environment; be suitable for all occasions. Product ParametersTechnical Parameters:PERFORMANCERated capacity150L200L250L300LHeating capacity1.5KW1.5KW1.5KW1.5KWPower supply220V~ /50Hz220V~ /50Hz220V~ /50Hz220V~ /50HzTankEnamel/s-steelHeat transfer modeMicro-Channel Heat ExchangerRefrigerantR290Electric heater2.5kw2.5kw2.5kw2.5kwNoise42 dB(A)42dB(A)42 dB(A)42 dB(A)Max. water temp.75ºC75ºC75ºC75ºCOperation range-5~43ºC-5~43ºC-5~43ºC-5~43ºCEnergy Efficiency COP3.93.93.93.9DIMENSIONProduct Dim.Φ525×1735mmφ525×1955 mmΦ675×1765mmΦ675×1950mmWeight80kg102kg135kg147kg Detailed Photos  Company ProfilePackaging & Shipping