15.6-Inch Android Touchscreen Display Panel-1920*1080- Rg156-A40

1. Product introductionUsers can easily achieve human-computer interaction through Android intelligent display terminals, and realize various personalized needs of users through Android general APP, such as WIFI/4G Internet access, Ethernet Internet access, web browsing, cloud interconnection, remote control, remote data transmission, playing music, playing videos, playing advertisements, etc. It can also communicate with external devices through serial ports such as RS232 and RS485.2. Product characteristics1. It can realize capacitive touch and display functions, realize human-computer interaction, and achieve various personalized needs through the APP.2. Support WIFI/4G/ Ethernet and other networking methods, which can achieve remote data transmission, and cloud interconnection.3. Multiple interfaces, support multiple RS232, RS485, and other different serial port communication, to achieve the exchange of communication with external devices.4. Supports voice and video playback.5. Industrial embedded design, easy to install.Display Parameters ParametersDataInstructionsDisplay size15.6 inch16:9Resolution1920*1080 Colors16.7M-Active Area dimension(A.A.)334.16(H)*193.59(W) mm Backlight brightness250 n itThe brightness can be adjusted by softwareBacklight lifetime (Hrs)50000HrsLED backlightViewing direction(CR>10)Wide view angle Touch typeCapacitive touch panelSupport single or 10 point touchWorking lifeA single point can be affordable≥50 million times Response time8ms Case size276.35*193*25.5 mm 4.2 Hardware parametersCPUALLWINNRETECH A40I,Cortex-A7,main frequency 1.2GMemoryDDR3 1GStorageEMMC FLASH 16G (the maximum can be extended to 32G)GPU/WIFIBuilt-in WIFI or WIFI/BT mode(can choose one of the two),802.11b/g/n, default single WIFI mode.Bluetooth/Operation systemAndroid 7.1.1OthersSupport RTC real-time clock, timing switchLanguageChinese, English, French, German, Italian, Japanese, Korean, Russian, Spanish, Polish, Czech and many other languages.5. Interface parametersPower interface1 external DC12V input socket and one built-in 6P input socket(including external power STANDBY function)Power interface220V power interfaceUSB6*USB HOST (two external, four built-in)TF card1*TF card standard interfaceSIM Card/HDMI1*HDMI A type of standard interface outputNet interfaceOne standard external RJ45 interface.Audio/video outputSupport left and right channel output, built-in dual 8R/5 power amplifierReset keySupport(1*UBOOT)COM2*RS232(Optional RS485,TTL)WIFI Antenna1*WiFi antenna6. Reliability parametersWorking temperature-20°C~70°CStorage temperature- 30°C~80°CRelative humidityHumidity: 90%, Temperature:50ºCVibration protection10Hz-50Hz-10Hz Amplitude 1.5mm X, Y, Z each 3HFront waterproof ratingThe front panel can reach an IP65-protected ratingCare and maintenance1. The power cable must be kept in good contact to avoid loosening, ignition, and voltage fluctuation.2. To turn off the machine, please close the current program and click"Start"-"Turn off" successively, when no signal is displayed, turn off the AC power switch.3. If you need to turn on the machine again after turning off the machine by the power switch, please wait at least 5 seconds. The switch of the body will cause some damage to the machine and affect the service life. Please avoid frequent switching operations.4. If not used for a long time after turning it off, it is best to cut off the external power supply(turn off the power socket and pull out the power plug. )5. Do not use the machine during thunderstorms, and remove the power cables and network cables to prevent lightning strikes.6. After external storage devices such as USB flash drives and mobile hard disks are finished, exit the devices according to the correct procedure and then remove them.7. If you are not absolutely sure, do not add, delete, or change computer system files and settings.8. If there is no special need or absolute certainty, do not use third-party software to repair the system.9. When cleaning the machine, please unplug the power plug first, and then apply the cleaning solution to the soft duster cloth, and then wipe it. Pay special attention to not placing too wet duster cloth inside the machine to avoid water in the machine.10. If the light is too bright, or even direct light, on the one hand, it affects the visual communication of the touch machine, and on the other hand, direct light will damage the electronic components of the screen.11. The humidity of the environment where the machine is located should be suitable. If the electronic equipment is too humid, it will affect the circuit condition and cause problems.Important notes:01. Do not place the machine in an unstable or prone-to-falling location.02. Avoid exposing the machine to sunlight and other heat sources.03. In thunderstorm weather (especially when there is lightning), please unplug the power plug and antenna plug.04. Please place the power cable in a location where people cannot trip over it and do not cover