Ronen Rgl104-A01 10.4 Inch Linux All-in-One Touchscreen Module

Product Introduction10.4Inch Linux All-In-One Touch Machine RGL104-A01 adapts RK3568 mainboard, resolution is 1024X768, supports LCD display driver interface, supports TF card, Ethernet, USB3.0, RS485, RS232 COM port, BTWIFI, and others. Meanwhile, various interfaces are customizable, meeting the needs of customers in various environments.Mainly used in industrial automation, medical equipment, smart homes, commercial equipment, buildings, transportation fields, etc.2. Product characteristics1. Aluminum alloy frame, high-end design2. Linux operating system, stable and reliable, with a highly customizable development platform3. Can realize capacitive touch and display functions to achieve human-computer interaction4. Support voice playback and video playback5. Support WIFI/Ethernet and other networking methods, which can realize remote data transmission and interconnection to the cloud6. Support a variety of interfaces, such as RS485, RS232, USB, and other different ways of communication, and communicate with external devices7. Embedded wall mounting has a variety of installation methods, easy to install, suitable for a variety of industries3. Product illustration3.1 Overall diagram of the product3.2 Product interface diagram3.3 Product structure diagram4. Product parameters4.1 LCD parametersSpecificationDataDescriptionScreen size10.4 InchRatio: 4:3Resolution1024*768 Color16.7M-Display size(A.A.)210.432(L)x157.824(W)mm-Overall dimensions242.63(L)x190.02(W) mm-Backlight brightness450cd/m2Adjusted by PMWBacklight life(Hour)50000HrsLED BacklightViewing angle(CR>10)Wide viewing anglePanel type: IPSTouching typeCapacitive touchSingle-point touch/ Multi-point touchService lifeTouching times≥50 million times Response time8ms 4.2 Hardware parametersSpecificationDataDescriptionCPURK3568 quad-core 64-bit Cortex-A55 with a maximum frequency of 2.0GhzAllwinner T113-S3 dual-core Cortex-A7GPUARM G52 2EE, supports OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1, Embedded high-performance 2D MemoryLPDDR4X 1GB/2GB/4GB/8GB (optional)Chip integration 128M SDRAMBuilt-in memoryEMMC 8G/16/32G/64G/128GB (optional)128M NandFlash or 8GB eMMC5. Interface parameterDisplay interfaceHDMI OUT interface HDMI2.0 Maximum supporting 3840x2160 output (inner supporting LVDS, EDP, MIPI) Audio interface Headphone holder interface 1 microphone mono input (analog signal input), 1 audio two-channel output (analog signal input)(microphone input) supported)Power amplifier interface Left and right dual channel output, support 8Ω 10W, dual speakerNetwork support Ethernet1 standard RJ45 interface, (built-in 1 x 2.0mm-4P socket), 10/100M Ethernet adaptable WIFI/BT On-board WIFI/BT module, support WiFi 2.4GHz/5GHz dual-band WiFi6 (optional), support 802.11a/b/g/n/ac protocol, support Bluetooth 4.0 (support BLE)Mobile networks 1 internal MINI PCIE cradle slot for extended connectivity to 3G/4G modulesBasic interface USB 2.0/3.0 2 USB Host ports, 1 external standard USB 3.0 cradle, for external HD USB camera, USB flash drive, keyboard and mouse, and other devicesUSB OTG 1 USB OTG port for debugging the system, and updating firmware, and can also be set as Host  Serial Port1-way serial port, (optional RS232 serial port, RS485 serial port)GPIO Port Built-in 5 IO ports, supporting input and outputOn-board RTC Built-in RTC: supports real-time clock, 1220 coin cell battery powered6. Reliability parameters  Operating temperature-20°C~70°CStorage temperature- 30°C~80°CRelative humidityHumidity: 95% Non-CondensingVibration protectionIEC 60068-2-64, random, 5 ~ 500 Hz, 1 hr/axisProduct certificationCCC/EMC/CB/ROHSFront waterproof ratingThe front panel is IP65-rated7.2 Maintenance1. The power cord must be kept in good contact to avoid loosening, ignition, and voltage up and down.2. Machine shutdown, please close the current program, then click "Start" and then "Shut down", and then turn off the AC power switch after no signal is displayed.3. Press the power switch to turn off the machine again if you need to turn it on again, wait at least 5 seconds before the operation, and the switch of the body will cause certain damage to the machine, affecting the service life, please avoid frequent power on and off operation.4. If it is not used for a long time after shutdown, it is best to cut off the external main power supply (turn off the power outlet and unplug the power plug).5. In thunderstorm weather, it is recommended not to use the machine, and it is best to unplug the power cord and network cable to prevent lightning strikes. The power cord must be kept in good contact to avoid loosening, ignition, and voltage up and down.6. After using external storage devices such as U disk and mobile hard disk, please exit the device according to the correct operation process and then unplug it.7. If you are not absolutely sure, do not add, delete, or change computer system files and settings at will.8. If there is no special need or absolute certainty, do not use third-party softw