200 Liter Integrated Pressure Solar Water Heater

Basic Info.Model NO.JD-200L-IPSWHMax. Capacity>200LStructure Compact Type Pressure Pressurized Interior Material Stainless Steel Collector ComponentsGlass Vacuum TubeComposition Collector CertificationCE, ISO9001, CCC, RoHS, CB, SASOTrademarkJDSOLARTransport PackageWooden BoxSpecification 200L OriginShanghaiHS Code8401100000Product Description The 200-liter integrated pressure-bearing solar water heater is the leading product of JDSOLAR and is currently selling well. Has the advantage of cost-effective.The pressure-bearing solar water heater is a solar water heater using a pressurized water tank. This pressurized water tank provides strong water pressure. It directly uses the pressure of the water supply network as the hot water outlet pressure, so that the hot water pressure is equal to the cold water pressure. The pressure-type solar water heater solves the problem that the ordinary roof type solar energy relies on the gravity drop and the hot water pressure is small, and the water pressure is large, the temperature adjustment is easy, and the temperature change is not caused by the uneven pressure of the hot and cold water.JDSOLAR integrated pressure solar water heaterQuick start, heat pipe can quickly transfer the heat from the vacuum tube to the water tankThe water heater is 1.5kgf/m??, which is directly connected to the water supply system.The water tank and the heat pipe are mechanically sealed, the seal is firm, a small number of vacuum tubes are damaged, and the water heater can still operate normally.The tank liner structure is designed reasonably, and the material selection is excellent. There is no damage after 100,000 times of compression fatigue test.The polyurethane is foamed as a whole, the density is large, the cells are fine and uniform, and the airtightness is good. After the foaming is successful, the water tank liner, the outer casing and the end cover form a whole at one time, and the water tank has excellent heat preservation effect.Multiple series and parallel connections can be used to combine into a collective hot water system.Heat pipe features:Heat pipe one-way heat transfer, small heat capacity, low starting temperature, fast speedThermally conductive working fluid has good compatibility with common metal materialsSince the heat transfer medium of the heat pipe is made of inorganic elements, even if the pipe wall temperature is ≥300 °C, it will not "burst"JDSOLAR heat pipe has good low temperature resistance and will not "frozen" at -40 ° C, and keep working.The heat pipe has excellent thermal conductivity, almost zero thermal resistance, thermal conductivity up to 7,000 times that of silver material, and heat flux up to 26000kw/m.Quickly supply more hot water. Water tanks and pipes have good insulation and can be used in winter.Provide more hot water.