Infitek RO/up Water Purifier 10/20/30L/H Laboratory Water Purification System Desktop Type Ultra-Pure Purifier

Infitek RO/UP Water Purifier 10/20/30L/H laboratory water purification system desktop type ultra-pure purifierFeatures1. Applicable to various water quality, the case is with powder coating.2. The filter element adopts open mold injection technology and inside the machine3. Korean quick-insert filter column is easy to replace and maintain.4. The electrical appliance and waterways are completely separated to avoid circuit failure caused by moisture and water leakage.5. Online water quality monitoring system, immediately measure the output water quality.6. Automatic RO membrane anti-scaling flushing program, automatic stop when tap water break, automatic water breaking when machine stop, storage tank automatically fill water, automatic stopping when water is full. 8. Equipped with a portable TDS pen, you can test TDS content, conductance, water temperature anytime, anywhere.9. Double electric water intakes, two kinds water quality, ready to use. Pressure online monitoring.10. Open door at front and back, this make filters replacement easy&convenient, the replacement can be easily completed without using any tools.11. Double water intakes: RO water and UP waterApplication:Applicable to all kinds of physical and chemical detection, biochemical analysis, blood examination, micro analysis, washing, HPLC, IC, GC, analytical experiments.Specification  duct SeriesLWP-F2 SeriesLWP-F2-F SeriesLWP-F2-V SeriesLWP-F2-VF SeriesModelLWP-F2-10LWP-F2-F10LWP-F2-V10LWP-F2-VF10LWP-F2-20LWP-F2-F20LWP-F2-V20LWP-F2-VF20LWP-F2-30LWP-F2-F30LWP-F2-V30LWP-F2-VF30Inlet water sourceUrban tap water, inlet water pressure: 0.15-0.5MPa, water temperature 5-40°CWater flow speed1.5-2L/min ( with pressure barrel)Machine capacity10L/H, 20L/H, 30L/H10L/H, 20L/H, 30L/H10L/H, 20L/H, 30L/H10L/H, 20L/H, 30L/HOutput Water qualityRO water: desalination rate as high as 95-99% (when using new RO membrane)RO water: desalination rate as high as 95-99% (when using new RO membrane)UP water: resistivity 18.25MΩ.cm@25°C (higher than laboratory water standard)UP water: resistivity 18.25MΩ.cm@25°CUP water: resistivity 18.25MΩ.cm@25°CUP water: resistivity 18.25MΩ.cm@25°CTOC: 0.22 um)