High Rejection Swro Reverse Osmosis Membrane as Water Purifier

UltraClean SW series special reverse osmosis membrane element for seawater desalination is a high-end reverse osmosis membrane element. The bottom membrane of the support layer has high compression resistance and thick skin.It is dense and has no defects on the membrane surface; it is resistant to abrasion and chemical degradation; and no post-treatment is required in the manufacturing process of membrane elements. Its wide pH resistance and high cleaning efficiency, can use ordinary acid and alkali for strong and efficient cleaning, because the cleaning is more thorough, the long-term operating pressure of the membrane system is lower, and the service life is higher. It can greatly reduce operating costs and bring long-term optimal economics to seawater desalination systems.Product  Highlights1.High salt rejection2.Compression resistance, contamination resistance and high cleaning efficiency3.Improve the overall economics of the desalination systemMembrane Specification  A inch(mm)B inch(mm)C inch(mm)40 (1016)1.125 (29)7.9 (201)Performance Specification  Effective Membrane Areaft²(m²)Stablized RejectionRate(%)Minimum Rejectionrate(%)Fluxgpd(m³/d)440 (41)99.8299.76600 (25)Test conditions: inlet pressure 5.5 MPa (800 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.Operating and Cleaning Limits  Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)Maximum operating pressure                                                                                                                                    1200 psi (83 bar)Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)pH rangeContinuous operation                                                                                                                                                                              2 - 11Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13Maximum Influent Sludge Density Index SDI                                                                                                                                             5Free chlorine tolerance                                                                                                                                                                   < 0.1 ppmPermeate flow for individual elements may vary ±15 percent from the value specifed.Active membrane area guaranteed ±4%.Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.Production LineAbout UsWhy Choose UltraClean/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1