Phenolic Wear Band/ Wear Strip/Guide Tape/Guide Ring

Description15*2.5 Phenolic Wear Band/ Wear Stirp is to guide the piston and piston rod of a hydraulic cylinder, as well as to withstand arising side loads. At the same time, it prevents any metal-to-metal contact, which will damage and score the surfaces and eventually cause seal damage, leakage and component damage. It is used extensively in mining applications. Application RangePressure Pr: N/mm² (Max) a 100@ 25° C 50>60° C Temperature [° C]: -40+120 Sliding speed[m/s]: 1 Medium: Mineral oil based hydraulic fluids, barely flammable hydraulic fluids, water, air and others. MaterialPhenolic Resin with Fabric Reinforcement (HG) -Type of cut The Angle Cut is the most frequently used standard type of cut. Rings with other types of cut, like Straight Cut is available on request. -Design Type Strip material is available in rolls or precut to size to fit with the gap necessary Thickness(mm)1.51.51.52222222.52.52.52.52.52.52.52.52.52.52.52.52.52.52.533Width(mm)5.66.39.75.66.38.19.710155.66.38.19.713131520253035454550609.72.5 Thickness(mm)33333333334444444444555555Width(mm)131520253035404550609.7152025303240455060303540455060  Product name15*2.5 Phenolic Wear Band/ Wear StirpBrand nameDEFTypeHydraulic sealMaterialWoven fabric resinforced polyester resin/phenolic resin Color                            Red, Blue Design typecut rings, spiral lengths and flat coilsPressure [MPa]350Temperature[°c]-40+120Sliding spee[m/s]