Maneurop Compressor Mtz144 Trane Reciprocating Refrigeration Spare Part

Maneurop Compressor Mtz144 Trane Reciprocating Refrigeration Spare Part Danfos Maneurop reciprocating compressors are specially designed for applications with a wide range of operating conditions. All components are of high quality and precision in order to assure a long product life.   Danfos Maneurop MT and MTZ series compressors are of the hermetic reciprocaing type and are designed for medium and high evaporating temperatureapplications. Features   1. The compressor design allows for the motor to be 100% suction-gas cooled.The positive benefits of internal motor protection, high efficiency circular valve design and high torque motors provide for a quality installation.The MT series is designed for use with the "traditional" R22 refrigerant, using mineral oil 160P as lubricant. The MT series can also be applied with several R-22 based refrigerant blends (substitute refrigerants), using 160 ABM alkylbenzene as lubricant.   2. The MTZ series is specifically designed for use with the HFC refrigerants R-407C, R-134a, R-404A, and R-507A, using 160PZ polyester oil as lubricant.   3. MTZ compressors can be used in new installations and also to replace Maneurop® MTE compressors in existing installations.   4. MT and MTZ compressors have a large internal free volume that protects against the risk of liquid hammering when liquid refrigerant enters the compressor.   5. MT and MTZ compressors are fully suction-gas cooled. This means that no additional compressor cooling is required and allows the compressors to be insulated with acoustic jackets to obtain lower sound levels, without the risk of the compressor overheating.Characteristics and Advantages   1. The compressor design allows for the motor to be 100% suction-gas cooled.The positive benefits of internal motor protection, high efficiency circular valve design and high torque motors provide for a quality installation.   2.The MT series is designed for use with the "traditional" R-22 refrigerant, using mineral oil 160P as lubricant. The MT series can also be applied with several R-22 based refrigerant blends (substitute refrigerants), using 160 ABM alkylbenzene as lubricant.   3. The MTZ series is specifically designed for use with the HFC freon R-407C, R-134a, R-404A, and R-507A.   4. MTZ compressors can be used in new refrigeration units and also to replace in existing refrigeration system.   5. MT and MTZ compressors have a large internal free volume to protects against the risk of liquid hammering.   5. MT and MTZ compressors are fully suction-gas cooled. This means that no additional compressor cooling is required and allows the compressors to be insulated with acoustic jackets to obtain lower sound levels, without the risk of the compressor overheating.  Our Maneurop compressors are for 50Hz,motor code is 4, can be used for R22/R407C/R134a/R404A/R507    1.piston /reciprocating type compressors. 2. Voltage is 50Hz 3. the refrigerant are  R22/R407C/R134a/R404A/R507 4. there are MT/MTZ series. 5. original  from France. 6. Capacity: 1.5HP~13HP,High efficiency , Low noise.   Technical Specifications   Compressor modelDisplacementCyl. numberOil ChargeNet weightCodein3/revcfh at 3600 rpmozlbsMT/MTZ018JA1.8423113246MT/MTZ022JC2.3329113246MT/MTZ028JE2.9336713251MT/MTZ032JF3.2941113253MT/MTZ036JG3.6946113255MT/MTZ040JH4.1451813257MT/MTZ044HJ4.6558126177MT/MTZ045HJ4.6558126177MT/MTZ050HK5.2365326177MT/MTZ051HK5.2365326177MT/MTZ056HL5.8773326182MT/MTZ057HL5.8773326182MT/MTZ064HM6.5782226182MT/MTZ065HM6.5782226182MT/MTZ072HN7.3892226188MT/MTZ073HN7.3892226188MT/MTZ080HP8.29103626188MT/MTZ081HP8.29103626188MT/MTZ100HM10.4513064132132MT/MTZ125HU13.1516434132141MT/MTZ144HV14.7618454132148MT/MTZ160HW16.5720714132152      Product detailsGross weight37.42 kgNet weight34.93 kgEAN5702428521161   Approval standardCEBrand techniqueReciprocating compressorCapacity controlFixed speedColourBlueCompressor power supply [V/Ph/Hz]400/3/50 460/3/60Configuration codeSingleConnection typeRotolockCylinder2DescriptionNTZ136-4BDiameter [mm]288 mmDischarge connection height [mm]74 mmDischarge connection mounting torque [Nm]90 NmDischarge connection pipe size [in]3/4 inDischarge connection rotolock size [in]1 1/4 inDischarge connection size [in]1 1/4 inDischarge connection sleeve pipe size [in]3/4 inDrawing number8502012gEconomizerNoFactory HP [bar]25 barFactory LP [bar]25 barFitting remark(shipped with rotolock version only)Fitting sleeveODFFitting standardRotolockFrequency [Hz]50Gauge port HPNoneGauge port LPSchraderGeneration codeAGlass mountingThreadedGlass torque [Nm]50 NmGP LP torque [Nm]15 NmHigh side max pressure (Ps)28.5 barHigh Side TS Max150 °CHigh Side TS Min-35 °CHigh Side Volume0.6 LHigh value of nominal voltage at 50Hz [V]400 VHigh value of voltage range at 50Hz [V]440 VIP protection classIP55 (with cable gland)Low side max pressure (Ps)22.6 barLow Side TS Max50 °CLow Side TS Min-35 °CLow Side Volume16.5 LLow value of nominal voltage at 50Hz [V]380 VLow value of voltage range