Shanli Cooling and Water Compressed Heatless No Air Loss Desiccant Dryer with Good Service Factory Price

Zero Air Consumption Compression Heat Regeneration Adsorption Dryer (PB Series)Detailed PhotosThe most significant advantages for the heat of compression regeneration adsorption dryer is that it makes full use of the high-temperature exhaust heat from the air compressor which make heating regeneration for desiccant.It cancels the electric heater of the heated regeneration adsorption dryer which saving the electric power consumption with a power consumption of only 0.5kW per hour.Working Principle :The high-temperature and unsaturated wet air discharged from the compressor and then enter into the dryer directly. Firstly, the air flow into a tower for heating regeneration, then the air after the regeneration flow into the after cooler for cooling and then the water be separated by the gas-liquid separator. And finally flow into another tower for dry adsorption which dry air be produced. After heating and regeneration, the high-temperature desaturated wet air discharged from the air compressor is firstly cooled by the bypass water cooler and separated by the bypass gas water separator, then enters the previously heated adsorption tower for cold blowing of adsorbent, and then enters the rear cooler for cooling and gas-water separator to separate the liquid water, and then enters another adsorption tower for adsorption, and is discharged into the use pipe through the outlet of the dryer Net. As this equipment is a derivative of the compression heat regeneration series, it has all the energy-saving effects of compression heat, and more importantly, it completely eliminates the gas consumption and greatly reduces the comprehensive energy consumption. It is fully in line with China's national policy of "energy saving and emission reduction" effect of the adsorption dryer. Our company has vigorously pushed this product to the market and has been widely praised by users. Product ParametersModel  Air capacity(Nm3/min)Length(mm)Wideth (mm)Height(mm)Dryer net weight(kg)Desiccant dryer (kg)Air connector diaPower consumption(w)Cooling water circulation(Nm3/h)SDXY-30PB-I303100190026503400850DN8050030SDXY-40PB-I403400200027004150990DN10050040SDXY -50PB-I    5034002000279044001300DN10050050SDXY -60PB-I6036002300292252001670DN12550060SDXY -80PB-I8040002400298563002050DN12550080SDXY-100PB-I10043002800303772002540DN150500106SDXY -120PB-I12046002800315488003600DN15050094SDXY -150PB-I150520033503407120004900DN200500118SDXY -180PB-I180540033503463132005600DN200500142SDXY -200PB-I200550034003535156006400DN200500156SDXY -220PB-I220570034003575166007150DN200500172Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºCCompany Profile Certifications FAQ /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1