API Standard Cast Iron Y Type Strainer

Part nameTube bodyFilterStretching rodO ringMaterialGrey cast iron or cast iron cast steelStainless steelCarbon steelNitrile rubberSY4P-10/16/25 TypeDN 6580100125150200250300350400450500LSpiral            Flange2502803504004405005806707808508501000HSpiral            Flange198210250305358450503578298618693765H1Spiral            Flange2702953444224856027108158448729781080API standard cast iron Y type strainer Size: 1/2 to 12 inches Connection: 1/2" to 2" can be threaded end, and 2" or over 2" can be flanged end. Nominal pressure: PN1.0/1.6mPa Dimension: ANSI B16.1, DIN3202-F1, and BS2080 Flange drilled is according to ANSI B16.1, ANSI B16.5, DIN 2501, and BS4504 Test standard: API 598 Body and bonnet: Cast-iron Mesh Screen: Stainless steel Bolt and nut: Carbon steel with zinc-plated Standard: ANSI, DIN3202-F1, and BS2080 Y strainers have pressure ratings, so you should choose one that has a rating suitable for your system. Similarly, you should make sure the piping to which the strainer is to be connected is not at an angle or offset, to prevent undue stress on threads or flanges. In a hot water system, a Y strainer is important because it traps any rust or scale circulating in the water. It should be installed immediately prior to the hot water circulating pump to prevent particulate matter from entering the impeller, or rotor, of the pump. A Y strainer should be installed with one valve before and one valve after the strainer itself. This means the strainer can be serviced without draining the complete system. /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1