Fub Horizontal Fluoroplastic Lined Chemical Plastic Lined Centrifugal Pumps

  Product DescriptionFUB Horizontal Fluoroplastic Lined Chemical Plastic Lined Centrifugal PumpsConform to design standard of ISO2858/GB/T5656Flow range: 2~600m2/hLift range: ~50mDesign pressure: ~1.6MPaApplication temperature: -20~+105ºCApplication field: This series of pump is mainly used in industries of oil refinery,petrochemical industry,coal chemical industry, power plant, environmental protection engineering, polluted water treatment and cement plant,etc.Suitable for transporting all kinds of clean, particle free or particle contained slurry, polluted water, neutral or corrosive medium.GeneralThis pump series is a cantilever-type horizontal single-stage-single-suction centrifugal pump. Its flow contact parts a-re made of steel-lined polyethylene with ultra-high molecular weight(UHMWPE). The material is a new corrosion-and-abrasion-resistant engineering plastic for the use of pump in the world. Its unique features are good resistance to abr-asion, good resistance to shock(specially for low temperature shock), resistance to creep deformation(resistance to crack resulted from ambient stress). and excellent resistance to corrosion.The pump is of remarkable characteristics: multifunction, i.e. The pump is suitable for many working conditions. For example, it can be used in conveying acid and alkali clear liquids of slurry. varieties of corrosive mine slurries of meta-llurgical industry, varieties of thin acids of sulfuric acid industry, varieties of waste water of environment protection in-dustry, etc. Because of the resistance to corrosion and abrasion, it is widely used.Brief introduction to main technical properties1.Model:FUB series2.Characteristics: resistance to corrosion and abrasion, one pump for multiple uses, suitable for acid and alkali clear liquids or slurries.3.Structure: (1)the pump body is made of with poly-thene with ultra-high molecular weight.Embedded pieces of steel reinforcement, Over-current components up to 20-40mm thick, wear and tear to extend the effective life. And easy sol-ution to the steel liner of plastic off phenomenon.(2)The blade wheel has two types: open type and closed type. It can be optionally chosen according to conditions of media.(3)Seal:K-type dynamic seal.4.Applicable media:sulfuric acid with concentration of less than 80%, nitric acid with concentration of less than 50%, hydrochloric acid with various concentration, liquid alkali, etc. It is used not only for clear liquid, but also for slurry.5.Main technical data:working temperature: -20ºC -80ºC (for special requirements and improved materials, the temp-erature can be up to 105). Inlet diameter:Ø32mm-Ø250mm.Flow:5-600m3/h.Lift: not more than 50m.Chart1                                     Product ParametersPerformance parameters of the tableCompany ProfileFAQ  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1