Wxqbmapsule Pressure Tank Fire Booster Regulator Water Supply Equipment

                                                                            IntroductionWXQB fire booster regulator water supply equipment is divided into qi and capsule type. As a complete set of fire fighting equipment to meet the automatic fire all the technical requirements.(WXQBP is a gas-filled pressure tank, WXQBM is a diaphragm-type pressure tank)By the pressure tank, pump, control cabinet, control instruments, pipe fittings and other components, the pump by the motor and pump of two parts. Fire booster series is the pump industry with reference to the National Building Standard Design Atlas 98S205 design and manufacture of fire special booster regulator equipment.Pump structure includes the pump body, impeller, pump cover, mechanical seals and other components, pump and motor coaxial. Pump axial force by the impeller balance ring to balance. Pump inlet and outlet in the same horizontal axis, and the same diameter specifications. The pump has a mounting base for easy installation and increased pump stability.                                                                      FeaturesWXQ series of fire pressure water supply equipment, in the control system uses a programmable control technology, fire main pump timing soft-start technology, effectively ensure the safe operation of fire equipment. Its characteristics are as follows:       1, can have dual power supply design, and can automatically switch;       2, multi-function programming control, fire main pump timing soft start inspection;       3, with the fire control center computer networking;       4, can accept a variety of fire signals, with fire center networking.Booster pump seal with mechanical seal, with a sealed, leak-free features. Water supply equipment usually used to pressurize the end of a fire-fighting pipe network.First, a long-term use of diaphragm can be inflated to prevent water pollution.Second, the equipment occupies a small investment province, automatic operation.Third, the fault protection, fault automatically switch.                                                                           Application1) In order to ensure that the fire pump at stand-by time, fire fighting equipment to meet the emergency fire.2) Mainly used for fire protection water supply in petrochemical, natural gas, power plants, textile cotton, wharf, aviation, warehousing, high-rise buildings and other industries.3) foam fire extinguishing system can also be used for water vessels, offshore tankers and fire ships and other occasions.4) can be used for direct extraction of municipal pipe network for water supply fire fighting water supply occasions.5) can be used for life, fire a water supply equipment for the occasion.6) Can be used for fire water supply pressure, fire inspection and other special occasions.                                                                 classification                                                                 1) Equipment for fire water supply system points: a. Fire hydrant water supply fire booster regulator water supply equipment b. Automatic sprinkler system fire booster regulator water supply equipmentc. hydrants and automatic sprinkler system fire booster regulator water supply equipment 2) equipment according to the installation location is divided into: a. On the type of fire booster regulator water supply equipment b. Under the set fire sprinkler pressure regulator water supply equipment 3) Equipment according to the pressure tank set is divided into:a. Vertical tank fire booster regulator water supply equipment b. horizontal tank fire booster regulator water supply equipmentc. Supplement gas pressurized pressurized water supply equipmentd. capsule fire pressurized water supply equipment                                                                  Use points1) The manufacturer of the pressure water tank shall hold the pressure vessel manufacturing license or registration, and shall have a sound quality management system and system.2) Equipment outsourcing parts must have a product certification and admission test before use. Equipment, pressure tank, pump units, electrical components and other components, should be tested before the assembly and use. The use of on-site assembly of equipment, on-site inspection machine performance.3) should hold the production license issued by the relevant departments.4) The overall structure of the equipment, water pipelines, gas pipelines and electrical wiring layout should be reasonable, should be left to install and maintain space for easy operation.5) The purchased components and materials used in the equipment shall be made of products that meet the national standards (industry standards).6) The structural requirements of the pump unit:a. Regulator pump should be equipment pump, its working capacity should be the same as the working pump.b. Each regulator pump should be set up a separate suction pipe.c. Pump water diversion should be used from the fillin