Cheap China Horizontal Chemical Process Pumps in ANSI304

Product DescriptionThe SLZ end suction, long coupled, single stage centrifugal chemical process pump is standardised to EN 22858 / ISO 2858 and can be used for a wide range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous solids. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include fuel transfer, chemical, energy plants, mining, fire fighting, irrigation, water supply, water treatment, pressurisation, grey water, dewatering, and marine.This is a large, heavy duty centrifugal chemical process pump with high flow and high pressure capabilities.The long coupled centrifugal chemical process pump design has many benefits.The long coupled configuration is very easy to maintain as it is possible to access the pump head without removing the motor.This process pump is also very robust and designed for continuous use as additional bearings are installed in the pump head, these take a large deal of strain away from the motor during operation.The back pull out design allows the motor to be removed while the pump is still connected to the pipework, this in turn allows time saving while the pump is serviced/maintained.The centrifugal chemical process pump and motor have independent shafts, this means that only the pump shaft will need to be replaced in the event of it breaking. Other less robust chemical process pumps on the market only use the motor shaft, this means that if the shaft breaks, the entire motor needs to be replaced.  The long coupled design means that there is a large space between the pump and motor, this in turn protects the motor from fluid ingress in the case of a seal failure.Product summary•    Can pump a wide range of clean low viscosity or slightly contaminated fluids•    Available with closed or semi open impeller•    Back pull out design to ensure quick and easy maintenance•    Maximum fluid temperature of 175°C•    Heavy duty shaft that does not come in contact with the fluid.•    External seal cooling system available•    Independent pump and motor shafts•    Available in cast iron, 316 stainless steel, duplex stainless steel, bronze and other materials upon request•    Suction and discharge flanges conform to EN 1092-2 / PN 16. Flanges according to EN 1092-1 / PN 16 for steel and stainless steel casings.•    Gland packing or single, double and cartridge mechanical seal options available•    Three phase 50hz / 60hz motors. IP55 as standard.•    ATEX version upon request•    Independent certification is available upon request•    Manufactured in accordance with standard EN 22858 / ISO 2858•    Low NPSH•    Assembly without alignment•    All impellers are balanced according to ISO 1940 class 6.3•    Long coupled with baseplate•    An API Seal can be installed - according to API682•    Oil lubricated ball bearings  Pump TypeCentrifugal Max Flow Rate1500M³HMax Head160MMax Temp 175°CMax Viscosity 200 cstMax Solid Passage 20mmSelf PrimingNInlet/Outlet Sizes32mm to 250mmMechanical seal typeDouble mechanical seal, API planPump Materials AISI304, AISI316, AISI316L, Bronze, Cast Iron, Cast Steel, Ductile Iron, Duplex, NiAl Bronze, Super DuplexDetailed PhotosFamous brand Bearings are widely used in our centrifugal pumps/chemical pumps products. Longer service life of our centrifugal pumps is expected even in harsh working environments. In order to balance axial thrust, there are both wear rings in front and at the back of the majority of the impeller and the balance hole is on the back shroud of the impeller. The axial thrust of some pumps is not big enough, so there is no wear ring and balance hole at the back of the impeller.High-precision casting impeller can ensure the performance, material in cast iron, stainless steel and bronze. There are generally two main groups:1) "Flush" - Clean, cool liquid is injected into the seal chamber to improve the operating environment. A second, smaller port is provided and normally oriented downward. It often serves as a leakage observation or vent opening.2) "Barrier or Buffer" used with dual seals - A secondary fluid is fed to the space between two sets of mechanical seals to prevent ambient air from contacting the pumped fluid, to improve seal cooling, and/or to enhance safety.It is worth mentioning that not all mechanical seals require special external flush arrangements.   Flexible couplingsUnlike rigid couplings, flexible couplings can accommodate some movement e.g. vibrations and thermal expansion without damage. This makes them ideal for applications where there is a degree of unavoidable misalignment between the drive and pump shafts. As they can absorb vibrations well, they can also be used to reduce excessive operating noise. With these benefits come a more complex, expensive design. However, as flexible couplings protect the shaft and bearings from damage and premat