High Chrome Alloy Horizontal Centrifugal Pump Water Pump Centrifugal Mining Pump Industrial Pump Mud Pump Centrifugal Pump Slurry Pump

Product DescriptionHigh Chrome Alloy  Slurry Pump Application and Features:Type BM, BH,  slurry pumps are cantilevered, horizontal, centrifugal slurry pumps.They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.The pumps of this type also may be installed in multistage series.The frame plates for the type BM, BH pumps have replaceable wear-resistant metal liners or rubber liners.The impellers are made of wear-resistant metal or rubber.The shaft seals for type BM, BH, pumps may be adoptable of gland seal or expeller seal.The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.High Chrome Alloy  Slurry Pump Brief Introcustion to Pump Type Selection:Refering to the performance curves of the pump the selected capacity range should be as follows:Pump Type BM, BH: 40-80% for higher density, strong abrasive slurries                                  40-80% for medium density, medium abrasive slurries                                 40-120% for lower density, lower abrasive slurries Product ParametersStructure Drawing:High Chrome Alloy  Slurry PumpTypeAllowable Mating Max.Power (kw)Clear Water PerformanceImpellerCapacity  QHead H(m)Speed n(r/min)Max EFF η(%)NPSH)(m)No of VanesImpel Dia(mm)(m 3 /h)(L/S)25BH-B1512.6-28.83.5-86-681200-3800402-4515237.5BH-B1532.4-729-206-581200-3200453.5-8518450BH-C3039.6-86.411-2412-641300-2700554-6521475BH-C3086.4-19824-559-521000-2200714-6524575BH-D60100BH-D60162-36045-10012-56800-1550655-85365100BH-E120150BH-E120360-828100-23010-61500-1140722-95510150BH-R300200BH-ST560612-1368170-38011-61400-850714-105686250BH-ST560936-1980260-5507-68300-8008265762300BH-ST5601260-2772350-77013-63300-600773-105965350BH-ST5601368-3060380-85011-63250-550794-1051067350BH-TU1200200BM-E120540-1440150-40014-60600-1100734-105549200BM-R300 Slurry pump Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increase or decrease the pressure and flow of fluid.When the slurry pump processing the solid mixture, the most worn parts are impellers. Impeller is the most important part of a pump. It is heart of a Slury Pump. Materials are BDA05, BDA49, BDA33, BDA61 Natural Rubber, Polyurethane...etc, to meet different working duty.There are main three type of slurry pump impeller, Open, Semi-open and Closed. We have types of vane impellers, such as two vane impeller, three vane impeller, four vane impeller, five vane impeller and six vane impeller. Regarding the material: BODA can offer high chrome alloy impeller, rubber impeller, polyurethane impeller and ceramic impeller.Slurry Pump volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Materials are BDA05, BDA49,BDA33, Natural Rubber , Polyurethane...etc, to meet different working duty.Quality metal wet parts quote usually refers to the metal parts inside the pump that are exposed to liquid. These parts are usually made of highly wear-resistant, high-strength metal materials, such as cast iron, high-chromium alloys, etc. Their features include:Wear resistance: It is usually made of materials with high hardness and strong wear resistance, which can resist wear during liquid transportation and extend the service life of the pump.Corrosion resistance: It has good corrosion resistance and is suitable for handling corrosive liquids to maintain the stability and reliability of the pump.High strength: These Low price Metal wet parts usually have high strength and can withstand liquid pressure, ensuring the normal operation of the pump in high-pressure environments.Thermal stability: This component can maintain stability in high-temperature environments and is suitable for scenarios where high-temperature liquids are handled.Easy to repair: The structure of this component is relatively simple and easy to disassemble and replace, which reduces the difficulty and cost of maintenance and repair.The customized metal wet parts are wear-resistant, corrosion-resistant, high-strength, and thermally stable, making them a key component of pumps in various industrial applications.Our horizontal slurry pump parts and vertical sump pump spare parts are dimensionally interchangeable with Foreign slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially ab