High Pressure Vertical Multistage Centrifugal Water Pump

High Pressure Vertical Multistage Centrifugal Water Pump1.Multi-stage Pump Introduction:QD, QDG series Horizontal Boiler Feed Water Pump.High Pressure Multistage PumpDescription: QD, QDG series centrifugal multistage pumps and QDL series vertical multistage centrifugal pumps are multiple single stage impeller combined together makes head high. They are used for pure water and liquids with concentration less than 1%, particles smaller than 0.1mm, or liquids similar to water in physico-chemical property. QD series pump's medium temperature can not exceed 80ºC, QDG series can not exceed 150ºC. Head: 76-1080m, flow rate: 3-600m3/h.  We can use different materials of HT200, QT500, ZG500 stainless steel etc by different medium.1) Easy installation and move;2) Pump body support by anchor assure the stable structure and maximum resistance off-center and distortion caused by line load;3) No overload design, make sure performance operate stably;4) Adopt national standard hydraulic model make sure high operation efficiency and good anti-cavitation performance;5) Packing seal and mechanical seal are available.    2. Vertical multistage booster application Suitalbe for mine, city Water Supply and Sewerage EngineeringTransfer watery liquid medium, without solid particle, temperature under 80°CSuitable for boiler water feed or deliver medium similar with hot water, without solid particle, temperature below 105°C Suitable for stain steel, mine, sewage transferring process.Transfer mine water with solid partical content under 1.5% or similar sewage, temperature under 80°CSuitable for transferring Corrosive liquid without solid partical, temperature between -20°C~105°CSuitable for transferring Oil and petroleum products without solid partical, temperature between -20°C~150°C, viscosity under 120cStHigh Pressure Vertical Multistage Booster Water Pump Application ListAir-conditioning system Cooling system Industrial cleaning Water treatment(Water purification) Aquiculture Fertilizing / metering system Environmental application Other special applications  3. Vertical Multistage Booster Water Pump Technical Specifications TypeQD(G)Capacity (m3/h)120-1100Head (m)967-2500Speed (r/min)2980-5410Eff.(%)68-86NPSHr (m)4.5-23.5Power (kw)710-8000 4.High Pressure Vertical Multistage Booster Water Pump Feature1, Easy maintenance: vertical pipeline structure, inlet & outlet at the same level, can be installed in any position and any direction, it is very easy whatever maintenance or installation.2, No water pollution: the keyflow passage components are made of stainless steel after stamping, which has good characteristics of light weight, clean, health, it is a perfect water pump of environmental protection, energy-saving.3, low operating cost, the main flow passage components are made of stainless steel after stamping, smooth flow passage components, which has good characteristics of high efficiency, less loss, low rate of failure, longer service life4, motor: the Aluminum Alloy motor has good characteristics of light weight, small volume, good heat dissipation, good appearance, longer service life, high efficiency and low noise, etc. 5.AdvantagesOver 20 years experience in pumpsWear resistant materialSpecialized Test EquipmentAnti-rust treatment castingCompany profile  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1