SMC Type Electric Proportional Regulator Valve with LED Indicator Light

SMC Type Electric Proportional Regulator Valve with LED Indicator Light   Product Description1. On off data visible2. Quick response times3. Direct proportional coil4. High stability and reliability5. High performance LED Indicator light6. Multiple measurement units for option7. Widely applications:Tension control, Flow control, Position Control, Pressure controlTechnical Data:  ItemElectric proportional Regulator ValvePower Consumption1.1 WConnection SizeAir Treatment1/4" NPTTemp. Range (F)32 to 122 Degrees FMax. Incoming PressureAir Treatment45 psiAccuracy (%)'+/-0.3%Max. FlowAir Treatment35 cfmEnclosureIP65Adjustment RangeAir Treatment0 to 30 psiIndicatorIntegral LEDInput VoltageAir Treatment24VDCHeight (In.)5.55Input Signal0-10V or 4-20 mAWidth (In.)2.25  Product Specification  ModelITV101_*6)ITV103_*6)ITV105_*6)ITV201_ITV203_ITV205_ITV301_ITV303_ITV305_Min. supply pressureSet pressure +0.1MPaMax. supply pressure0.2 MPa1.0 MPaSet pressure range0.005 to 0.1 MPa0.005 to 0.5 MPa0.005 to 0.9 MPaPower supplyVoltage24VDC±10%,12 to 15VDCCurrent consumptionPower supply voltage 24 VDC type: 0.12 A or lessPower supply voltage 12 to 15 VDC type: 0.18 A or lessInput signalCurrent type*1)4 to 20 mADC,0 to 20 mADC (Sink type)Voltage type0 to 5 VDC,0 to 10 VDCPreset input4 points (Negative common), 16 points (No common polarity)Input impedanceCurrent type250Ω or less*5)Voltage typeApprox.6.5kΩPreset inputPower supply voltage 24 VDC type: Approx. 4.7 kΩPower supply voltage 12 VDC type: Approx. 2.0 kΩOutput signal*2)(Monitor output)Analog output1 to5 VDC (Output impedance: Approx. 1 kΩ)4 to 20 mADC (Sink type) (Output impedance: 250 kΩ or less)Output accuracy±6% F.S. or lessswtich outputNPN open collector output: Max. 30 V, 80 mAPNP open collector output: Max. 80 mALinearity±1% F.S. or lessHysteresis0.5% F.S. or lessRepeatability±0.5% F.S. or lessSensitivity0.2% F.S. or lessTemperature characteristics±0.12%F.S./ºC or lessOutput pressure display*3)Accuracy±2%F.S.±1 digit or lessMin.unitMPa: 0.001,  kgf/cm2: 0.01, bar: 0.01,  psi: 0.1*4),  kPa: 1Ambient and fluid temperature0 to 50ºC (No condensation)EnclosureIP65   How To OrderOrdering Code ITV Series Electro-Pneumatic RegulatorITV 3 0 1    0     -       0      1    Nil1    2    Nil2     S     Nil3    -    Nil43→ Model1: 1000 types2: 2000 types3: 3000 types1→ Pressure range1: 0.1MPa3: 0.5MPa5: 0.9MPa0→ Supply voltage0: DC24V1: DC12 to 15V0→ Input signal model0Current type DC4 to 20mA (Sink type)1Current type DC0 to 20mA (Sink type)2Voltage type DC0 to 5V3Voltage type DC0 to 10V404 points preset input5216 points preset input (Switch output/NPN output)5316 points preset input (Switch output/PNP output)1→ Monitor output1Analog output DC1 to 5V2Switch output/NPN output3Switch output/PNP output4Analog output DC4 to 20mA(Sink type)NilNoneNil1→ Thread typeNil: RcN: NPTT: NPTFF: G2→ Port size1: 1/8 (1000 type)2: 1/4 (1000,2000,3000type)3: 3/8 (2000,3000 type)4: 1/2 (3000 type)Nil2→ BracketNil: Without bracketB: Flat bracketC: L-bracket*The bracket is included.S→ Cable typeS: Straight type 3mL: Right angle type 3mN: Without cable connectorNil3→ Pressure unitNil: MPa2: kgf/cm²3: bar4: psi5: kPaNil4→ Made to order  Note*1) 2-wire type DC4 to 20mA is not available. Power supply voltage(DC24V or DC12 to 15V) is required.*2) Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output. When measuring ITV analog output from DC1 to 5V, if the load impedance is less than 100kΩ, the analog output monitor accuracy of within ±6% (full span) may not be available. The product with an accuracy of within ±6%  is supplied upon your request. Output pressure remains unaffected.*3) Adjustment of numerical values such as the zero/span adjustment or preset input type is set based on the min. units for output pressure display(e.g. 0.001 to 0.500MPa). Note that the unit cannot be changed.*4) The min. unit for 0.9MPa(130psi) types is 1psi.*5) Value for the state with no over current circuit included. If an allowance is provided for an over current circuit, the input impedance varies depending on the input current. This is 350Ω or less for an input current of DC20mA.*6) The ITV1000 series is a grease-free specification(parts in contact with fluid).*7) The above characteristics are confined to the static state. When air is consumed on the output side, the pressure may fluctuate.Main DimensionsProduct CategoryPackaging & ShippingPackaging type: VPC BoxWhite BoxColor BoxVPC CartonPalletDelivery time:Conventional ProductsCustomized ProductsSpecially Customized ProductsOn the day of payment10 workdays 25 workdays.Payment term:PayPalTTWestern UnionDPLCMoney GramOnline BankAlibaba Credit OrderPay LaterDAYESYESYESNONOYESYESYESYES         YES            Transportation:Express (DHL, UPS, TNT, JCEX, FEDEX) is available.Sea and Air transports are available.The most suitable transport way will be chosen for you.About UsFAQQ1: What is your quality assura