Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve of Relief Valve J-Valves

Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve1.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Specifications:  Standard Compliance: ANI 6D, BS 1868Pressure-Temp. Rating: ANSI B16.34Face to Face: ANSI B16.10End Flange: ANSI B16.5/ASME B16.47Butt Welding Ends: ANSI B16.25Inspection and Test: Tested to API 598, BS 6755, Certified to EN10204 3.1BSize: 2~36inWorking Pressure: 150LB~2500LbSuitable Medium: Oil, Nature Gas, Water, Steam; Acid, Alkali, Organic Compounds  2.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Standards:   Size: 2~36 inWorking Pressure: 150LB~2500LbMaterial: WCB, CF8(SS304), CF8M(SS316).3.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Product Features:Bolted bonnet, and the type of middle flange gasket may be different according to pressure class; Check valve in 600LB may adopt pressure sealed structure.Disc stop device to prevent disc from being opened too high, thus causing failure to be closed down.Solid pin is precisely installed and provided with high intensity to ensure operational performance and service life of valve.Rocker arm is given enough intensity. Upon being closed down, it has enough freedom for the close-down of valve disc.Large size check valve are provided with lifting rings for the convenience of hoisting. 4.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Product of Structure:  5.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Product  of Material ListFeatures:      Swing Type DiscBolted CoverRising Stem and Non-Rising Hand wheelThreaded Seat RingRenewable Seat RingApplications:  Chemical, Refinery PlantGas Purification PlantPower Station, ShipbuildingRecycling FacilitiesJ-VALVES Note: All the data should be confirmed with the approved drawings of manufacturer.6.Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve Product Main dimensions&Weight:Cast Iron/Ductile Iron/Cast Steel 150lb/300lb/600lb/900lb/ Flange End Rubber Seated Swing / Wafer / Lift / Ball Check Valve can be operated by pneumatic actuator,electric actuator,intelligent control head and manual operation.There are a variety of standards provided to customers,such as,DIN,API,ANSI,and so onTips:        We also manufacture other type valves, as butterfly valve, check valve, globe valve, Y strainer, sanitary butterfly valve, sanitary ball and so on.   Any item meets your interest, anything confused you, pls keep me posted, let's talk more.J-VALVES Service  On SamplesBuyer bear the air fee, but this fee will be reduced from order directlyOn After SalesFree replacement if there is any quality problemOn DeliveryNever delay delivery timeOn MaterialsEnsure material pureEnsure material pureWelcomeJ-VALVES Company Information:J-VALVES Packing ShippingFAQQ1: We are interested in your products?A1: In order to recommend you suitable products, please provide detail information, like size, material, pressure, model.Q2: Is the requirement for MOQ?A2: For some small size, like 2''-48''(DN50-DN1200), it request the MOQ is 50pcs for each size. Generally speaking, it depends on your order.Q3: How about the warranty?A3: The warranty time is 18 months after leaving our factory. We can repair or change because of the quality problems.Q4: PaymentA4: Mainly T/T, Western Union & PayPal are applicable for us. Payment Term: 30% prepayment, 70% balance paid before shipping or against copy of BL.Q5: Can you manufacture different standards valves according to customer requirements?A5: Yes. We can manufacture API,DIN,GOST,JIS standards for different pressure & temperature & size according to different needs.If you want to know more about our products, please contact freely. We will patiently answer your all questions.To get more Information at our websites:  http://jiefavalves.en.made-in-china.com J-VALVES Other Products We Manufacture                 1.Industry Valves            Ball Valve            3 Way Ball Valve            1 PC Male/Female Thread Ball Valve            2 PC Male/Female Thread Ball Valve            3 PC Male/Female Thread Ball Valve            1 PC Flange/Welding/Union Ball Valve            2 PC Flange/Welding/Union Ball Valve            3 PC Flange/Welding/Union Ball Valve            Globe Valve            Male/Female Thread Globe Valve            Flange Globe Valve            Gate Valve            Male/Female Thread Gate Valve            Flange Gate Valve            Check Valve            Wafer Check Valve            Spring Check Valve            Dual Disc/Plat Wafer Check Valve            Swing C