Viair Air Ride Suspension Chrome 480c Air Pump Compressors

VIAIR 20008 High-Flow Air Source Kit High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry's leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed!!!!To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.Why is Viair the Best??- Industry Leader for 12v Air Systems-No Maintenance Oil-Less Design Compressors-Thermal Overload Protection-High Performance PTFE Rings-Gearless Direct Drive PMG Motors-ISO 9001 Certified200psi Air Compressor (100% Duty @ 100psi)Use For Air HornsUse For Load Level Air SpringsUse For Suspension Air BagsUse For Air LockersUse For Tire InflationUse For Air ToolsFeatures:-  Gearless, direct-drive electric motors- Oil-less design requires no maintenance (beside filter inspection/replacement)- High performance, heavy duty PTFE piston ring- Anodized piston cylinder for increased wear protection- Precision, high speed, durable bearings for increased piston & motor life- Sealed motor housing for moisture resistance- Environmental seals where electrical connections enter motor housing- Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance- High performance check valve eliminates restart pressure on head and piston- Replacement air filter elements (filtration to 10 microns)- Heavy duty mounting feet- Reinforced vibration isolators for safe & quiet operation- Mounting hardware (bolts, washers, locking washers, nuts)- Thermal overload protection that protect compressor in event of overheating/over duty cycle operation - Maximum operating temperature is 158 F- Minimum operating temperature is -40 F. - Wires terminated with ring ground terminal & spade positive lead terminal- VIAIR 12 Month Manufacturer WarrantySpecifications:VIAIR PN: 20008VIAIR 480c Compressor 12-VoltPermanent Magnetic MotorDuty Cycle: 100% @ 100 PSI (50% @ 200 PSI)Max. Working Pressure: 200 PSIMax. Amp Draw: 23 AmpsDimensions: 19.7"L x 5.9"W x 13.9"HKit Includes: Pressure Switch(165psi ON - 200psi OFF) Compression Fitting for 3/8'' ID Tubing Leader Hose with Check Valve 250psi Safety Valve Drain Petcock Mounting Hardware Tank Fill Rate: 0 to 200 PSI -----3 Min. 56 Sec. 165 to 200 PSI -----1 Min. 02 Sec. /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1