6201 Z, Zz, 2RS, 2rz, High Quality 6201 Deep Groove Ball Bearing

Product Description6200 series deep groove ball bearingsother series:https://delmarbearing.en.made-in-china.com/product-list-1.htmlBearing NO(mm)Boundary Dimensions(Kn)(Kn)(r/min)Limit Rotational Speed(Kg)WeightdDBDynamic Load RatingCrStatic Load RatingCorGrease LubricationOil Lubrication6200103095.112.3924000300000.03262011232106.823.0622000280000.03562021535117.643.7220000240000.04562031740129.574.7917000200000.064620420471412.846.6515000180000.103620525521514.027.8813000150000.127620630621619.4611.3111000130000.202620735721725.6715.309500110000.287620840801829.5218.148500100000.367620945851932.6720.68750090000.416621050902035.0723.18710085000.4626211551002143.5029.20630075000.6026212601102252.5036.00560071000.7896213651202358.5040.50530063000.9906214701252463.7045.00500063001.1006215751302568.9049.00480056001.2006216801402672.5053.00450053001.4006217851502883.2063.80430050001.7506218901603095.8071.50400048002.20062199517032110.082.80380045002.620622010018034122.092.80360043003.200622110519036133.0105.034004000-622211020038144.0117.028003400-622412021540155.0131.026003200-   Detailed Photos Black chamfer with rubber sealBlack chamfer with white dust coveropen UGwhite chamfer with yellow dust coverceramic ball bearingTHE USE OF THE BEARINGSome tips on useRolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.(1) Keep clean the bearing and its surrounding areasIt is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.(2) Use bearing carefullyScar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.(3) Use the appropriate operating toolAvoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.(4) Be careful to the rust corrosion of the bearingsThe sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You'd better wear gloves in doing the work. (5) Handler should familiar with bearing(6) Establish bearing handling criteri·Bearing storage.Bearing and surrounding cleaning.Dimension of mounting parts and inspection.Machining quality.Mounting handing.After mounting inspection·Disassembly handing·Keep maintain·Adding lubricant  Installation Instructions Bearing mounting Precautions for proper mounting of bearing1) Bearing preparationBearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.2) Inspection of shafts and housingsCleaning shaft and housing, confirming no scratched or machine burrs, no abrasive and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.Bearing storageBefore leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.In addition, storage occasion should avoid sunshine and contact with cold wall.Pictures about packaging  Company ProfileOur Advantages1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the