Rod End Bearing Kr72 Kr80 Kr85 Kr90 Posa Phsa POS Phs Industrial Bearing GB/T9161 Standard Corrosion Resistance, Wear Resistance, High Quality

Product DescriptionRod end bearing  KR72 KR80 KR85 KR90 POSA PHSA POS PHS Industrial Bearing GB/T9161 standard Corrosion resistance, wear resistance, high qualityinformation:The basic type of plain bearing is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere, which can bear large load. According to its different types and structures, it can bear radial load, axial load or combined radial and axial load at the same time. Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of the joint bearing is large and the inclination angle is large, but also because most joint bearings adopt special process treatment methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, pad inlay, spraying, etc. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubricating dirt pollution. Therefore, articulated bearings are widely used in swing motion, tilt motion and rotation motion with low speed.  Detailed Photos    Product Parameters    E series        /mm SI…E SI…ES   SA…E SA…ES   d       D d1min B r1smin α ≈ d3 c1 max d2 max h l1 min l2 max h1 l3 min l4 max l5 max d4 max d5 max SI5E SA5E 5 14 7 6 0.3 13° M5 4.5 21 36 16 48 30 11 42 5.0 10 13 SI6E SA6E 6 14 8 6 0.3 13° M6 4.5 21 36 16 48 30 11 42 5.0 11 13 SI8E SA8E 8 16 10 8 0.3 15° M8 6.5 24 42 21 55 36 15 49 5.0 13 16 SI10E SA10E 10 19 13 9 0.3 12° M10 7.5 29 48 26 63 43 15 58 5.5 16 19 SI12E SA12E 12 22 15 10 0.3 10° M12 8.5 34 54 28 71 50 18 67 7.0 19 22 SI15ES SA15ES 15 26 18 12 0.3 8° M14 10.5 40 63 34 83 61 21 81 8.0 22 26 SI17ES SA17ES 17 30 20 14 0.3 10° M16 11.5 46 69 36 92 67 24 90 10.0 25 29 SI20ES SA20ES 20 35 24 16 0.3 9° M20×1.5 13.5 53 78 43 105 77 30 104 10.0 28 34 SI25ES SA25ES 25 42 29 20 0.6 7° M24×2.0 18.0 64 94 53 126 94 36 126 12.0 35 42 SI30ES SA30ES 30 47 34 22 0.6 6° M30×2.0 20.0 73 110 65 147 110 45 147 15.0 42 50 SI35ES SA35ES 35 55 39 25 0.6 6° M36×3.0 22.0 82 140 82 182 125 60 167 15.0 48 58 SI40ES SA40ES 40 62 45 28 0.6 7° M39×3.0 24.0 92 150 86 198 142 65 180 18.0 52 65 SI45ES SA45ES 45 68 50 32 0.6 7° M42×3.0 28.0 102 163 92 217 145 65 199 20.0 58 70 SI50ES SA50ES 50 75 55 35 0.6 6° M45×3.0 31.0 112 185 104 246 160 68 221 20.0 62 75 SI60ES SA60ES 60 90 66 44 1.0 6° M52×3.0 39.0 135 210 115 282 175 70 247 20.0 70 88 SI70ES SA70ES 70 105 77 49 1.0 6° M56×4.0 43.0 160 235 125 318 200 80 283 20.0 80 98 SI80ES SA80ES 80 120 88 55 1.0 6° M64×4.0 48.0 180 270 140 365 230 85 325 25.0 95 110    SA5E NHS5 NOS5 KR13 NUKR35X DC2222G   SA6E NHS6 NOS6 KR16 NUKR40X DC2776   SA8E NHS8 NOS8 KR19 NUKR47X DC3034   SA10E NHS10 NOS10 KR22 NUKR52X DC3175(3C)   SA12E NHS12 NOS12 KR26 NUKR62X DC4445A   SA15ES NHS14 NOS14 KR30 NUKR62XA DC4972(4C)   SA17ES NHS16 NOS16 KR32 PUKR62 DC5476A(4C)   SA20ES NHS18 NOS18 KR35 NUKR72X DC5476B(4C)   SA25ES NHS20 NOS20 KR40 NUKR80X DC5476C(4C)   SA30ES NHS22 NOS22 KR47 NUKR86KX DC5776A   SA35ES NHS25 NOS25 KR52 NUKR90X DC6334B   SA40ES NHS28 NOS28 KR62 NUKR100X DC7221(5C)   SA45ES NHS30 NOS30 KR72 NUKR120X DC72221B   SA50ES   KR80 NUKR140X DC7221B(5C)   SA60ES   KR85 NUKR150X DC7969C(5C)   SA70ES   KR90 NUKR160X DC8334C   SA80ES    NUKR170X DC8729A       NUKR180X DC10323A(3C)        DC12334C        DC12388C(11C)   Packaging & Shipping Company Profile   Our AdvantagesOur Advantages:1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer's requirements and needs.5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. SAMPLES1. Samples quantity: 1-10 PCS are available. 2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to    pay samples charge and shipping cost. 3. It's better to start your order with Trade Assurance to get full protection for your samples order. CUSTOMIZEDThe