Double Head Pneumatic Non-Standard Hot Melt Spot Plastic Welding Machine

  Desktop pneumatic hot melt machine model:BY-3025RR(QD)  Product DescriptionThis equipment has been applied to the hot-melt riveting of chassis products, and the equipment can be welded simultaneously from two different directions. The total number of riveting points is 4, and the temperature is controlled by area.  10 sets of welding procedures can be pre-stored, and the data interface can be linked to the production line.  MISUMI original heating device. Hot riveting head temperature control, with temperature self-check, closed loop control, multi-point independent temperature control, temperature control accuracy can reach ±2 degrees.  Equipped with man-machine interface, Chinese and English interface operation is more intuitive. The cooling system adopts blowing air cooling. The production cycle is 25S-40S.  Man-Machine EngineeringSafety: The equipment is equipped with a protective grating and a safety baffle for scalding safety warnings. Authority management: The device sets the administrator and operator authority. The height of the working table is 750MM. (Sitting operation) The device is started by two hands.  Equipment capabilityIndiscriminate operation verification (the device is protected if it does not follow standard procedures).Quality traceabilityCapacity record requirements. Alarm fault code and its record. Man-machine interface: The visual information of the man-machine interface includes current operation steps, alarm information and solutions. IMS interactive function: support Ethernet communication, the equipment has a QR code scanning recognition function, hot riveting temperature, displacement, hot riveting time data can be recorded and the data needs to be pushed to the company's IMS system. (This function is customized according to customer requirements.)    Electrical layout/SafetyThe equipment is equipped with tooling identification sensors. When the tooling model is installed incorrectly, the system will alarm and lock the equipment. Locking function: The product is locked in the corresponding station due to misoperation or failure of the equipment (requires designated personnel to unlock). Equipment alarm: In the event of equipment failure or misoperation, the man-machine interface displays alarm information and prompts the cause of the failure; the three-color light shows the failure. Control system voltage DC24. I/O- Each station I/O has a 10% margin for future expansion.  Technical ParametersEquipment dimensions(L)460MM*(W)400MM*(H)900MM. Maximum mold capacity of equipment:(L)300MM*(W250MM*(H)250MM. Power : 3-phase 380V 50Hz, can be customized. Air source specifications: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA). Adaptable to ambient temperature : -5ºC~40ºC Adaptable to ambient humidity : 20%~80% The noise of the transmission part does not exceed 70 decibels.   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1