Sps 800 Roundness Plate and Shell Heat Exchanger Without Gasket

Desgin PrincipleThe roundness plate and shell heat exchanger contains a round plate pack in which the "herringbone" pattern is pressed into each plate. The products pass through the port holes and into the gap between the plates. The heat transfer takes place when the warmer product transfers energy through the flow plates and delivers it to the colder opposing product without mixing the both products.The "herringbone" pattern ensures turbulent flow within the effective area. Furthermore, this pattern brings "metallic" contact between the plates, then optimal differential pressure is achieved.The plate pack is firmly fixed into the round shellThe advantages of this roundness plate and shell heat exchanger:unique and durable plate bundle structure,roundness plate and ring shape are welded, stress uniformly distribution,plate bundle and shell are not welded,this can bear all kinds of heat expansion sturdy and secure shell structure, this can be installed in any position and is not affected by external forces, no leakage or explosionvery compact structure,small volume,light weight,the thermal insulation of the site is convenient and saves the heat preservation areaThe flexible design of the structure can meet the different heat transfer needs,multiple nozzle arrangement,multiple configurations are availablecorrugated flow channel medium turbulent flow, small scaling rate,long operation period,extremely low maintenance cost various materials are available, various process combinations, various plate and shell type are available  Technical Parameters:   Design PressureWT1.6/2.5/4.0/6.3MPaMaximum Pressure9.8 MPaDesign Temperature-100-450ºCMaximum design Temperature-196-700ºCheat exchanger0.5-280 m2minimum heat transfer temperature difference